CA 06 350Z front brakes - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

MrMcgarrett · 12-19-2009, 02:46 AM

Got a set of huge 350Z front brakes.
Rotors are 320mmx28mm.
Rotors are in good condition, no grooves and such.
Pads have lots of life left.
The mounting holes on the spindles need to be opened up to 14mm.
SS braided lines included.
You'll need at least a 17in wheel.

Setup consist of:
Calipers
Rotors
Lines
Modded S13 Spindles(no hubs)

$220
Shipping will be pricey due to the weight.

SDS13COUPE · 12-19-2009, 09:35 AM

Whats modded on the spindle?

Marcus · 12-19-2009, 09:39 AM

the bolt holes have to be drilled to a larger size. i forgot how big. i had to do this for mine

rb25crazy · 12-19-2009, 10:20 AM

if u mod the spindle the 5 lug hub works too?

Def · 12-19-2009, 11:29 AM

Damn, can you fools not read?!?!

You drill the caliper mounting holes on the spindle up to 14 mm(up from the S13/S14 stock 14 mm).

MrMcgarrett · 12-19-2009, 12:16 PM

See below post lol

MrMcgarrett · 12-19-2009, 12:21 PM

Quote:

Originally Posted by SDS13COUPE

Whats modded on the spindle?

The mounting holes were drilled to 9/16in(14.3mm)
Little bigger then they need to be but I couldn't find a 14mm drill bit.

Quote:

Originally Posted by rb25crazy

if u mod the spindle the 5 lug hub works too?

The hubs were made for the S13 spindle.

nochain · 12-19-2009, 09:22 PM

FREE BUMP haha

I put a set on my z31 worked hella good wish I still had them I would buy but I need to find a 5 lug setup first that is not retarded expensive

MrMcgarrett · 12-20-2009, 07:19 PM

Last time to the top.

12-19-2009, 02:46 AM	#1
MrMcgarrett Post Whore! Join Date: Sep 2006 Location: Pomona, CA Age: 43 Posts: 5,591 Trader Rating: (313) Feedback Score: 313 reviews	06 350Z front brakes Got a set of huge 350Z front brakes. Rotors are 320mmx28mm. Rotors are in good condition, no grooves and such. Pads have lots of life left. The mounting holes on the spindles need to be opened up to 14mm. SS braided lines included. You'll need at least a 17in wheel. Setup consist of: Calipers Rotors Lines Modded S13 Spindles(no hubs) $220 Shipping will be pricey due to the weight.

12-19-2009, 11:29 AM	#5
Def Post Whore! Join Date: Apr 2004 Location: Houston, TX Posts: 2,701 Trader Rating: (16) Feedback Score: 16 reviews	Damn, can you fools not read?!?! You drill the caliper mounting holes on the spindle up to 14 mm(up from the S13/S14 stock 14 mm). __________________ S13 Hatch - Goes around tracks quickly DEFSPORT

12-19-2009, 09:35 AM	#2
SDS13COUPE Zilvia FREAK! Join Date: May 2006 Location: San Diego Age: 39 Posts: 1,403 Trader Rating: (19) Feedback Score: 19 reviews	Whats modded on the spindle?

12-19-2009, 09:39 AM	#3
Marcus Nissanaholic! Join Date: Nov 2007 Location: San Diego Age: 37 Posts: 2,087 Trader Rating: (18) Feedback Score: 18 reviews	the bolt holes have to be drilled to a larger size. i forgot how big. i had to do this for mine

12-19-2009, 10:20 AM	#4
rb25crazy Zilvia FREAK! Join Date: Aug 2006 Location: cali Age: 39 Posts: 1,024 Trader Rating: (14) Feedback Score: 14 reviews	if u mod the spindle the 5 lug hub works too?

12-19-2009, 12:16 PM	#6
MrMcgarrett Post Whore! Join Date: Sep 2006 Location: Pomona, CA Age: 43 Posts: 5,591 Trader Rating: (313) Feedback Score: 313 reviews	See below post lol

12-19-2009, 09:22 PM	#8
nochain Zilvia Member Join Date: Feb 2009 Location: Ventura, CA Age: 36 Posts: 232 Trader Rating: (6) Feedback Score: 6 reviews	FREE BUMP haha I put a set on my z31 worked hella good wish I still had them I would buy but I need to find a 5 lug setup first that is not retarded expensive

12-20-2009, 07:19 PM	#9
MrMcgarrett Post Whore! Join Date: Sep 2006 Location: Pomona, CA Age: 43 Posts: 5,591 Trader Rating: (313) Feedback Score: 313 reviews	Last time to the top.