why does my SR20det run 10psi when should 7psi stock

[rb25_s13*CHUKI]

Stock factory boost Is 7 psi. I've owned 7 sr20's. I've swapped them all In my self and watched them boost 6-7 psi. You should look for a bent/tweaked Actuator arm. That's a common trick people use to up the boost a few pounds or check for added washers on the acuator mounting bolts. I added spacers with 3 inch elbow,down pipe and straight pipe and I held a steady 12 psi. without spacers and the same exhaust set-up It held a steady 7 psi.

[ILoveMyRHS13]

Originally Posted by JVD

NO.

If you have the factory solenoid you will run 11psi.

If you run straight off the wastegate you'll only get 7psi.

PS. Try to punctuate. Your shit makes no sense.

Originally Posted by rb25_s13*CHUKI

Stock factory boost Is 7 psi. I've owned 7 sr20's. I've swapped them all In my self and watched them boost 6-7 psi. You should look for a bent/tweaked Actuator arm. That's a common trick people use to up the boost a few pounds or check for added washers on the acuator mounting bolts. I added spacers with 3 inch elbow,down pipe and straight pipe and I held a steady 12 psi. without spacers and the same exhaust set-up It held a steady 7 psi.

Maybe people will learn one day that stock boost for an SR is NOT, I repeat NOT 7LBS