Plug questoin, and s13 intake manifold question (Sohc to dohc swap s13) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

KeseanS14 · 03-31-2010, 05:52 PM

I'm doing a sohc to dohc swap with a 97 dohc and with the 93 s13 intake manifold.

my question is the beginning of the egr was blocked off with a plate,
i don't know where or what else is egr on this intake mani, was wondering if anyone else knew.

also, there are 4 really small hard to soft vacuum lines on the s13 intake manifold that goes to a bracket with two plugs on the backside of the s13 Head.

Plate form back of head with small vacuum lines.

4 small hardline running from the the plate on the back of the head to the front of the intake manifold

On my S14, 3 of those 4 small intake lines are blocked off at the throttle body.. do i need to run those or block them off, i do not know where they go.

My biggest problem is figuring out where these tiny hardlines go and if i need to block them off like my s14. i saw that one hardline went to the butterfly valve thing. im sure i need to keep that one. but what about he rest

Also
on the lower harness or transmission harness on the dohc s13, i have a plug that i do not know where it goes.

its that plug, one wire brown and the other black. the motors currently outside the car, and ive mapped out where the rest goes, but that one has me stumped.

everything's going into a sohc car, and im worried i wont find out where it goes.

Thanks to anyone that can help me with this problem
and i hope im making sense lol
Motors going in in a day.

KeseanS14 · 03-31-2010, 10:42 PM

Cmon gais!
need help!

projectRDM · 04-01-2010, 07:51 AM

That harness looks like the SOHC lower, because the black and brown wired plug is the PS pressure switch. I may not be 100% on that though, been a while.

For the intake, there's a few writeups with detailed pictures of EGR and other such removal.

KeseanS14 · 04-02-2010, 02:45 AM

Thanks ProjectRDM, it is a sohc harness, its one i had laying around and i just assumed it was a dohc.

and what we ended up doing with the intake mani was using the 93 Bottom Half and the 97 Top half, got rid of EGR, and all those pesky vacuum lines.

Motor will be going in tomorrow, hoping everything goes well.

ABS motor swaps Blows!
getting past that ABS "unit" was a Bit*H!

03-31-2010, 05:52 PM	#1
KeseanS14 Leaky Injector Join Date: May 2008 Location: SC Posts: 60 Trader Rating: (2) Feedback Score: 2 reviews	Plug questoin, and s13 intake manifold question (Sohc to dohc swap s13) I'm doing a sohc to dohc swap with a 97 dohc and with the 93 s13 intake manifold. my question is the beginning of the egr was blocked off with a plate, i don't know where or what else is egr on this intake mani, was wondering if anyone else knew. also, there are 4 really small hard to soft vacuum lines on the s13 intake manifold that goes to a bracket with two plugs on the backside of the s13 Head. Plate form back of head with small vacuum lines. 4 small hardline running from the the plate on the back of the head to the front of the intake manifold On my S14, 3 of those 4 small intake lines are blocked off at the throttle body.. do i need to run those or block them off, i do not know where they go. My biggest problem is figuring out where these tiny hardlines go and if i need to block them off like my s14. i saw that one hardline went to the butterfly valve thing. im sure i need to keep that one. but what about he rest Also on the lower harness or transmission harness on the dohc s13, i have a plug that i do not know where it goes. its that plug, one wire brown and the other black. the motors currently outside the car, and ive mapped out where the rest goes, but that one has me stumped. everything's going into a sohc car, and im worried i wont find out where it goes. Thanks to anyone that can help me with this problem and i hope im making sense lol Motors going in in a day. __________________ 240's are gay.

03-31-2010, 10:42 PM	#2
KeseanS14 Leaky Injector Join Date: May 2008 Location: SC Posts: 60 Trader Rating: (2) Feedback Score: 2 reviews	Cmon gais! need help! __________________ 240's are gay.

04-01-2010, 07:51 AM	#3
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	That harness looks like the SOHC lower, because the black and brown wired plug is the PS pressure switch. I may not be 100% on that though, been a while. For the intake, there's a few writeups with detailed pictures of EGR and other such removal. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

04-02-2010, 02:45 AM	#4
KeseanS14 Leaky Injector Join Date: May 2008 Location: SC Posts: 60 Trader Rating: (2) Feedback Score: 2 reviews	Thanks ProjectRDM, it is a sohc harness, its one i had laying around and i just assumed it was a dohc. and what we ended up doing with the intake mani was using the 93 Bottom Half and the 97 Top half, got rid of EGR, and all those pesky vacuum lines. Motor will be going in tomorrow, hoping everything goes well. ABS motor swaps Blows! getting past that ABS "unit" was a Bit*H! __________________ 240's are gay.