![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
![]() |
#10 |
Zilvia Member
![]() |
good to know that im not alone in this, you guys got more things dead on as well
-yes my car has hks cams (256 or 264 i don't remember anymore) -the IACV is a fresh one and worked great on the motor it came from (fresh sr from a front clip, and I cleaned it out good before installing it onto the greddy intake manifold -i have splitfire module and coilpacks for ignition so now looking at the solutions that some of you suggested - I don't have fc datalogit nor know how to use it, so i would not be able to back up my tune and relearn the idle - I have not changed anything in my engine bay since doing the relearn, cams and everything etc were already installed as it wouldn't make sense to tune my car without the cams and then install them - the only thing I can think of is that there were no headlights on my car when it was being tuned, so we used the blower motor to simulate the electrical load I have come to accept the way it idles and what not and drive it around, but it just gets on my nerves sometimes. Anyway, don't know what to do next whether to leave it or.. |
![]() |
![]() |
Bookmarks |
|
|