Reducing boost creep, stock t25?

[tire_machine]

I have a stock T25 setup in my SR, and am getting boost creep to 9psi (in higher rpms)

I have a Greddy profec b spec II, but the boost creep is there regardless if the ebc is hooked up or not.

What can be done to get my boost operating a solid stock level (7psi) so that when I play with my ebc I know that I will be getting to proper boost??

Thanks

[jspaeth]

Originally Posted by tire_machine

I have a stock T25 setup in my SR, and am getting boost creep to 9psi (in higher rpms)

I have a Greddy profec b spec II, but the boost creep is there regardless if the ebc is hooked up or not.

What can be done to get my boost operating a solid stock level (7psi) so that when I play with my ebc I know that I will be getting to proper boost??

Thanks

Nothing, it just happends....that's why there are boost controllers

[tire_machine]

So, with the creep being present even with the greddy ebc connected....means what?

[jspaeth]

Originally Posted by tire_machine

So, with the creep being present even with the greddy ebc connected....means what?

Is it connected AND set up? You do realize you ahve to set it up, right?

Also, this is why I am not a huge fan of boost controllers that don't let you set the gain at different RPM point (compared to one global gain value).....because a constant gain will generally NOT give a constant boost throughout the RPM range.

[bb4_96]

boost doesn't break up on n/a ls swaps