Evap Canister Woes... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Bigsyke · 08-24-2010, 12:22 AM

Torch them out/

Use a torch, get them hot, then use some soft candle wax and pb blaster. Let it soak, then torch them again untill they start to bubble around the threads. Can you flip it over and use vice grips on the non threaded part of the bolt?

Other wise center punch, drill.

THe one that keeps spinning, you may need to stick a blade in there and wedge the bolt while you loosen.

08-24-2010, 12:22 AM	#2
Bigsyke Zilvia FREAK! Join Date: Jun 2008 Location: NA Age: 40 Posts: 1,342 Trader Rating: (0) Feedback Score: 0 reviews	Torch them out/ Use a torch, get them hot, then use some soft candle wax and pb blaster. Let it soak, then torch them again untill they start to bubble around the threads. Can you flip it over and use vice grips on the non threaded part of the bolt? Other wise center punch, drill. THe one that keeps spinning, you may need to stick a blade in there and wedge the bolt while you loosen.