Spacers.

[theboy]

Originally Posted by smoked240

i'm also tossing up the idea of making a spool for my differential.

better be dead on with your measurements. I tried the same thing and ended up blowing out a diff case and toasted a half shaft. re-did all the numbers and found out i was .002 off.

[smoked240]

Originally Posted by theboy

better be dead on with your measurements. I tried the same thing and ended up blowing out a diff case and toasted a half shaft. re-did all the numbers and found out i was .002 off.

I know, Well I measure in the .0001 ten-thousandths of an inch to be spot on. The only thing is keeping the machines in line but there cnc's so I shall be fine.