PA OEM sr20 redtop parts, best offers accepted, I want it gone - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

claymans13 · 10-09-2010, 08:48 AM

Ok, well this is pretty much all i have left. ALL PRICES ARE O.B.O. But be reasonable here, those who are serious know what I mean. If its not pictured/listed here I don't have it.

With that said here we go with what I have left.

Sr20det redtop transmission - 125

Fidanza 11lb flywheel (there is a broken bolt in it so it would need to go to a machine shop) - 125

ACT Clutch - 75 (I don't know anything about it, i know it held up good on my previous setup, and engagement wasn't to harsh. it was on the car when i bought it)

Upper and lower oilpan - 60

redtop waterpump - 20

Oil pump/timing cover - 70

Throttle body - 15
Waterneck - 10
Thermostat housing - 15
CAS - SOLD

Not pictured
OEM Crankshaft - 100
OEM Fuel Rail - 30

PLEASE if you are going to PM me, have the courtesy to respond to my replies to you. I won't wait around forever for you to respond to my pm's i will just move on to the next person willing to buy.

Sr20SilviaS13 · 10-09-2010, 09:04 AM

last known condition of SR trans? IS that a side feed rail? Are you willing to ship trans? PM me please.

Dbruesch · 10-09-2010, 01:22 PM

IACV for sale

Benster · 10-09-2010, 01:27 PM

beautiful block. how did you get it so cleannn. I send mine to the machine shop and they remove all the oil and grease but not the rust. how do i get my block like that?

S13Lurch · 10-09-2010, 03:07 PM

Im interested in the sr harness.
I could pick it up.
Text/call me at 559-903-7623
Or email me at [email protected]

thanks.

claymans13 · 10-09-2010, 04:04 PM

sr20silv

SR trans is working, the shifter was pulled for a short throw but i never got around to it, I do have the oem shifter though. Last time I drove it, all gears engaged fine and there was no grinding. Yes I am willing to ship the trans, but it MIGHT need to go freight. I would have to ge ta final weight once I built a box for it.

The rail pictured is a top feed, but I do have an OEM side feed also

Dbruesch

Sorry, no i do not have the iacv anymore

Benster

The block was pressure washed with steam, and then coated with bright silver engine enamel.

s13lurch

I responded to you PM.

Mesarina · 10-09-2010, 04:23 PM

I want the thermostat housing, is that price shipped?

S13Lurch · 10-09-2010, 05:03 PM

I did not get your PM.

claymans13 · 10-09-2010, 07:01 PM

Quote:

Originally Posted by Mesarina

I want the thermostat housing, is that price shipped?

yes, lurch, sorry, i forgot to hit send, it should be in your inbox now.

S13Lurch · 10-09-2010, 07:10 PM

I still didnt get it. haha.

claymans13 · 10-09-2010, 09:39 PM

haha, i dunno whats going on. I'll shoot you a text tomorrow if thats cool. I'm getting ready to turn in for the night.

claymans13 · 10-11-2010, 08:58 AM

Monday bump

claymans13 · 10-12-2010, 01:34 PM

tuesday bump. I will accept reasonable offers and perhaps some trades. I want this crap out of my garage. My loss is your gain.

casten01 · 10-13-2010, 09:52 PM

lmk about the crankshaft! how much would it be for shipping to 32246?

penco · 10-14-2010, 04:28 AM

pic of broken bolt on flywheel?

claymans13 · 10-14-2010, 08:32 AM

Pics of broken bolt in flywheel. Theres a good bit of material left, you can probably grind flat spots and use a wrench to turn it out.

claymans13 · 11-03-2010, 04:32 PM

best offers accepted on everything, I want it gone.

*racerx2k1* · 11-04-2010, 09:41 AM

Quote:

Originally Posted by claymans13

Monday bump

Quote:

Originally Posted by claymans13

tuesday bump. I will accept reasonable offers and perhaps some trades. I want this crap out of my garage. My loss is your gain.

Quote:

Originally Posted by claymans13

best offers accepted on everything, I want it gone.

2 bump limit. You can start new thread in 3 days.

10-09-2010, 08:48 AM	#1
claymans13 Zilvia Member Join Date: Apr 2008 Location: pittsburgh Age: 43 Posts: 162 Trader Rating: (9) Feedback Score: 9 reviews	OEM sr20 redtop parts, best offers accepted, I want it gone Ok, well this is pretty much all i have left. ALL PRICES ARE O.B.O. But be reasonable here, those who are serious know what I mean. If its not pictured/listed here I don't have it. With that said here we go with what I have left. Sr20det redtop transmission - 125 Fidanza 11lb flywheel (there is a broken bolt in it so it would need to go to a machine shop) - 125 ACT Clutch - 75 (I don't know anything about it, i know it held up good on my previous setup, and engagement wasn't to harsh. it was on the car when i bought it) Upper and lower oilpan - 60 redtop waterpump - 20 Oil pump/timing cover - 70 Throttle body - 15 Waterneck - 10 Thermostat housing - 15 CAS - SOLD Not pictured OEM Crankshaft - 100 OEM Fuel Rail - 30 PLEASE if you are going to PM me, have the courtesy to respond to my replies to you. I won't wait around forever for you to respond to my pm's i will just move on to the next person willing to buy. Last edited by claymans13; 11-02-2010 at 07:17 AM..

10-09-2010, 09:04 AM	#2
Sr20SilviaS13 Zilvia Junkie Join Date: Aug 2010 Location: Derry NH Age: 35 Posts: 359 Trader Rating: (4) Feedback Score: 4 reviews	last known condition of SR trans? IS that a side feed rail? Are you willing to ship trans? PM me please. __________________ I do motor swaps in exchange for lunch.

10-09-2010, 01:27 PM	#4
Benster Join Date: Jun 2010 Location: Sunny Kalifornia Age: 34 Posts: 45 Trader Rating: (1) Feedback Score: 1 reviews	beautiful block. how did you get it so cleannn. I send mine to the machine shop and they remove all the oil and grease but not the rust. how do i get my block like that? __________________ My intials. Thanks Mom & Dad.

10-09-2010, 01:22 PM	#3
Dbruesch Leaky Injector Join Date: Jun 2010 Location: Temple City Posts: 64 Trader Rating: (3) Feedback Score: 3 reviews	IACV for sale

10-09-2010, 03:07 PM	#5
S13Lurch Join Date: Sep 2010 Location: California Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	Im interested in the sr harness. I could pick it up. Text/call me at 559-903-7623 Or email me at [email protected] thanks.

10-09-2010, 04:04 PM	#6
claymans13 Zilvia Member Join Date: Apr 2008 Location: pittsburgh Age: 43 Posts: 162 Trader Rating: (9) Feedback Score: 9 reviews	sr20silv SR trans is working, the shifter was pulled for a short throw but i never got around to it, I do have the oem shifter though. Last time I drove it, all gears engaged fine and there was no grinding. Yes I am willing to ship the trans, but it MIGHT need to go freight. I would have to ge ta final weight once I built a box for it. The rail pictured is a top feed, but I do have an OEM side feed also Dbruesch Sorry, no i do not have the iacv anymore Benster The block was pressure washed with steam, and then coated with bright silver engine enamel. s13lurch I responded to you PM.

10-09-2010, 04:23 PM	#7
Mesarina Zilvia Member Join Date: Dec 2009 Location: Guatemala Age: 37 Posts: 158 Trader Rating: (0) Feedback Score: 0 reviews	I want the thermostat housing, is that price shipped?

10-09-2010, 05:03 PM	#8
S13Lurch Join Date: Sep 2010 Location: California Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	I did not get your PM.

10-09-2010, 07:10 PM	#10
S13Lurch Join Date: Sep 2010 Location: California Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	I still didnt get it. haha.

10-09-2010, 09:39 PM	#11
claymans13 Zilvia Member Join Date: Apr 2008 Location: pittsburgh Age: 43 Posts: 162 Trader Rating: (9) Feedback Score: 9 reviews	haha, i dunno whats going on. I'll shoot you a text tomorrow if thats cool. I'm getting ready to turn in for the night.

10-11-2010, 08:58 AM	#12
claymans13 Zilvia Member Join Date: Apr 2008 Location: pittsburgh Age: 43 Posts: 162 Trader Rating: (9) Feedback Score: 9 reviews	Monday bump

10-12-2010, 01:34 PM	#13
claymans13 Zilvia Member Join Date: Apr 2008 Location: pittsburgh Age: 43 Posts: 162 Trader Rating: (9) Feedback Score: 9 reviews	tuesday bump. I will accept reasonable offers and perhaps some trades. I want this crap out of my garage. My loss is your gain.

10-13-2010, 09:52 PM	#14
casten01 Leaky Injector Join Date: May 2009 Location: San Diego, CA Age: 40 Posts: 91 Trader Rating: (3) Feedback Score: 3 reviews	lmk about the crankshaft! how much would it be for shipping to 32246?

10-14-2010, 04:28 AM	#15
penco Zilvia Member Join Date: Feb 2008 Location: Milwaukee Age: 40 Posts: 249 Trader Rating: (1) Feedback Score: 1 reviews	pic of broken bolt on flywheel?

10-14-2010, 08:32 AM	#16
claymans13 Zilvia Member Join Date: Apr 2008 Location: pittsburgh Age: 43 Posts: 162 Trader Rating: (9) Feedback Score: 9 reviews	Pics of broken bolt in flywheel. Theres a good bit of material left, you can probably grind flat spots and use a wrench to turn it out.

11-03-2010, 04:32 PM	#17
claymans13 Zilvia Member Join Date: Apr 2008 Location: pittsburgh Age: 43 Posts: 162 Trader Rating: (9) Feedback Score: 9 reviews	best offers accepted on everything, I want it gone.