KY Tons of SR20 parts - 500hp setup - Greddy, Wiesco, HKS, Ferrea, JWT - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

hennajapagaijin · 11-24-2010, 10:04 PM

I am selling my setup that I have pieced together over the past few years. Half of the stuff was never used. All prices are OBO and include shipping unless otherwise stated (mainly for the heavier pieces). I also have a wiring harness and Enthalpy ROM tuned ecu available but not listed. Please email any questions or offers to [email protected]

SR20DET block re-sleeved and bored to 88mm ($800+shipping) (never reassembled since it was sleeved) SOLD

SR20DET Head ported/polished w/ 1mm Over-Sized Ferrea intake/exhaust Valves, Ferrea Dual Valve Springs, Ferrea Titanium retainers, JWT bronze intake/exhaust valve guides, new valve steam seals ($1200+shipping) (never used) SOLD

2ea SR20DET 5-speed Transmissions ($200+Shipping) and 1ea 300zx 5-speed Transmission ($250+shipping) (I planned on using the Mazworx adapter kit w/ this)

Hybrid Dynamics Turbo Kit (Garrett GT3076R .63a/r) Top-mount Equal length manifold, Tial 44mm WG, all oil/coolant lines for SR, Mani and hot side of turbo are Jet Hot coated, downpipe and exhaust are still on the car ($2,000+shipping)(less than 1,000 miles on this kit)

Genuine Greddy Intake Mani ($500)/JGY Top mount Fuel Rail($85)/ MSD 72# injectors (set of 4 $200) (Less than 1,000 Miles on all of these)

Splitfire Ignition System ($325)(ignition amplifier not pictured but included, Less than 1,000 miles)

Genuine GReddy Oil Pan ($225)(Less than 1,000 Miles)

The following items are brand new and never installed or used
Eagle Rods ($270) SOLD

Custom 88mm Wiseco Pistons with Swain Gold Coat on Dome and PC-9 on Skirt ($500)

JWT C1 Cams ($500) SOLD

HKS Cam Gears ($300) SOLD

Tomei Solid Pivot Lifters ($225) SOLD

Cometic HG (Works with 88mm Pistons) $85

A’pexi 87mm/1.1mm (works with 88mm Pistons)$165

GReddy Rocker Arm Stoppers ($50)

Nismo Engine and tranny mounts ($215) SOLD

Spec Lightened Flywheel ($240)

RPS Max Street Clutch Rated at 475ft/lbs ($370) SOLD

ARP Head and Main Studs ($215) can sell seperate

New OEM Rocker Arms / Timing Chain Tensioner / Throw Out bearing

New OEM misc gaskets, seals, etc

Calico CT-1 coated race bearings (have new OEM as well)

OEW Water Pump ($35)

Timing Chain

Timing cover oil pump ($210) SOLD

These four boxes contain misc SR parts and accessories (Power steering pump, alternator, starter , fan etc) this in addition to the parts I have already listed, nothing in these boxes are pictured or listed above

sr20time · 11-24-2010, 10:12 PM

dang nice parts... Timing Chain how much?

dr.klawn · 11-24-2010, 10:21 PM

crank shipped to 36695?

NMs14.5kouki · 11-25-2010, 10:50 AM

do you have a stock blacktop sr ecu? whats the tune on the Enthalpy ecu? pm me prices on both too.

jarend · 11-25-2010, 12:34 PM

the splitfires are 380 brand new.. pm me if you are able to go any lower..

DJPimpFlex · 11-25-2010, 01:06 PM

Waterpump for S13 or S14 sr?

nxt774 · 11-25-2010, 01:10 PM

such a large collection of parts, registered since 2005, this is your first post, and listed as located in japan ..... hmmm
either scam or the biggest lurker known to zilvia

P-Funk alot · 11-25-2010, 01:19 PM

just put it together and keep it man alot of time and money and your more then half way to beasting

hennajapagaijin · 11-25-2010, 01:30 PM

Quote:

Originally Posted by nxt774

such a large collection of parts, registered since 2005, this is your first post, and listed as located in japan ..... hmmm
either scam or the biggest lurker known to zilvia

I was stationed in Japan when I was in the military. I'm on FA, Nico, LS1Tech, 502Streetscene, ARImport, MDstreetscene, ebay and more under the same screen name (and actually posted a few times). You can see this car/setup and my current cars on some of those sites. I don't post much but read and 'search' a lot. I have seen people get flamed for not searching but rarely for not posting.

Quote:

Originally Posted by P-Funk alot

just put it together and keep it man alot of time and money and your more then half way to beasting

I hear ya! I am no longer able to drive a standard transmission and I don't think this setup as an auto would be much fun. I just bought an LS6 to put in my Chevette but may put it in S14 shell I have instead. I just know I need to get rid of this stuff.

JohnnyTyVan180sx · 11-25-2010, 04:07 PM

spec flywheel interested..

hennajapagaijin · 11-30-2010, 09:58 AM

Bump.......

thenucci24 · 11-30-2010, 12:08 PM

how much for sr20det starter shipped to 46815 and what is the condition?

chibich · 12-09-2010, 08:29 AM

stock sr20 cams? shipped to 23233

schrapnel85 · 12-09-2010, 09:28 AM

great prices! check out prepped blocks or prepped heads on mazworx and compare! those items would be a steal! and of course this comes up at xmas! GLWS

leekim240 · 12-09-2010, 09:38 AM

hey are you willing to part with the wastgate. Let me know asap

titangts · 12-26-2010, 09:24 PM

PM sent!! check it dude! thanks

v8kllr240sx · 12-27-2010, 02:45 AM

Head studs shipped to 33870 pm me

zxc4 · 12-27-2010, 01:43 PM

PM me if you will part with the "oil/coolant lines" from the turbo kit

JonGu · 12-27-2010, 09:55 PM

Still have the SR20 starter? What are you looking to get for it shipped to 77055 assuming it's in good condition? Also how much for the engine harness and what condition is that in.

gotta240 · 12-28-2010, 04:56 PM

How much for the sr20 ps pump? Or just that little bracket bolted to it behind the pulley?

sr20time · 12-28-2010, 07:24 PM

\how much for oe water pump+timing chain shipped? also might be wanting the rocker arm stoppers.

RHDskyline · 12-28-2010, 07:53 PM

sr ps pump? price?

PM ME

Xclusive_racer · 12-29-2010, 01:37 AM

PM the individual prices on the pelican boxes

didderson · 01-16-2012, 10:10 PM

what diameter injector openings is that fuel rail?

JDGrimReaper666 · 01-16-2012, 11:07 PM

Will the ras fit a s14 sr20? If so, pm me

*wangan_cruiser* · 01-19-2012, 08:47 PM

main studs are used or bnib just open to check?

speedgod^s13 · 01-19-2012, 10:34 PM

Wow, a thread from 2 thousand fucking 10.

1slicktwo4oh · 01-19-2012, 10:34 PM

Price on rocker arms ship to 90605

Speedy Claxton · 01-19-2012, 10:45 PM

S13 ps pump and brackets shipped to 77657.

*wangan_cruiser* · 01-19-2012, 10:48 PM

Quote:

Originally Posted by speedgod^s13

Wow, a thread from 2 thousand fucking 10.

hey stupid someone bumped this thread before me. learn to read douche paradouche

11-24-2010, 10:04 PM	#1
hennajapagaijin Join Date: Jul 2005 Location: , Aomori-ken, Japan Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	Tons of SR20 parts - 500hp setup - Greddy, Wiesco, HKS, Ferrea, JWT I am selling my setup that I have pieced together over the past few years. Half of the stuff was never used. All prices are OBO and include shipping unless otherwise stated (mainly for the heavier pieces). I also have a wiring harness and Enthalpy ROM tuned ecu available but not listed. Please email any questions or offers to [email protected] SR20DET block re-sleeved and bored to 88mm ($800+shipping) (never reassembled since it was sleeved) SOLD SR20DET Head ported/polished w/ 1mm Over-Sized Ferrea intake/exhaust Valves, Ferrea Dual Valve Springs, Ferrea Titanium retainers, JWT bronze intake/exhaust valve guides, new valve steam seals ($1200+shipping) (never used) SOLD 2ea SR20DET 5-speed Transmissions ($200+Shipping) and 1ea 300zx 5-speed Transmission ($250+shipping) (I planned on using the Mazworx adapter kit w/ this) Hybrid Dynamics Turbo Kit (Garrett GT3076R .63a/r) Top-mount Equal length manifold, Tial 44mm WG, all oil/coolant lines for SR, Mani and hot side of turbo are Jet Hot coated, downpipe and exhaust are still on the car ($2,000+shipping)(less than 1,000 miles on this kit) Genuine Greddy Intake Mani ($500)/JGY Top mount Fuel Rail($85)/ MSD 72# injectors (set of 4 $200) (Less than 1,000 Miles on all of these) Splitfire Ignition System ($325)(ignition amplifier not pictured but included, Less than 1,000 miles) Genuine GReddy Oil Pan ($225)(Less than 1,000 Miles) The following items are brand new and never installed or used Eagle Rods ($270) SOLD Custom 88mm Wiseco Pistons with Swain Gold Coat on Dome and PC-9 on Skirt ($500) JWT C1 Cams ($500) SOLD HKS Cam Gears ($300) SOLD Tomei Solid Pivot Lifters ($225) SOLD Cometic HG (Works with 88mm Pistons) $85 A’pexi 87mm/1.1mm (works with 88mm Pistons)$165 GReddy Rocker Arm Stoppers ($50) Nismo Engine and tranny mounts ($215) SOLD Spec Lightened Flywheel ($240) RPS Max Street Clutch Rated at 475ft/lbs ($370) SOLD ARP Head and Main Studs ($215) can sell seperate New OEM Rocker Arms / Timing Chain Tensioner / Throw Out bearing New OEM misc gaskets, seals, etc Calico CT-1 coated race bearings (have new OEM as well) OEW Water Pump ($35) Timing Chain Timing cover oil pump ($210) SOLD These four boxes contain misc SR parts and accessories (Power steering pump, alternator, starter , fan etc) this in addition to the parts I have already listed, nothing in these boxes are pictured or listed above Last edited by hennajapagaijin; 02-01-2011 at 02:59 AM.. Reason: updated with sold items

11-24-2010, 10:21 PM	#3
dr.klawn Leaky Injector Join Date: Jul 2009 Location: Mobtown,Al Posts: 104 Trader Rating: (3) Feedback Score: 3 reviews	crank shipped to 36695? __________________

11-25-2010, 01:06 PM	#6
DJPimpFlex Post Whore! Join Date: Jan 2004 Location: Rohnert Park, CA Age: 39 Posts: 6,158 Trader Rating: (115) Rides Gallery: DJPimpFlex Feedback Score: 115 reviews	Waterpump for S13 or S14 sr? __________________

12-27-2010, 09:55 PM	#19
JonGu Leaky Injector Join Date: Feb 2008 Location: Houston, TX Posts: 95 Trader Rating: (5) Feedback Score: 5 reviews	Still have the SR20 starter? What are you looking to get for it shipped to 77055 assuming it's in good condition? Also how much for the engine harness and what condition is that in. Last edited by JonGu; 12-27-2010 at 10:31 PM..

12-29-2010, 01:37 AM	#23
Xclusive_racer Zilvia FREAK! Join Date: Jul 2008 Location: Fort Worth, TX Age: 41 Posts: 1,245 Trader Rating: (21) Feedback Score: 21 reviews	PM the individual prices on the pelican boxes __________________ You Build Cheap! Your Car Will Feel and Drive Cheap!

11-24-2010, 10:12 PM	#2
sr20time Zilvia Junkie Join Date: Oct 2010 Location: canada Posts: 597 Trader Rating: (8) Feedback Score: 8 reviews	dang nice parts... Timing Chain how much?

11-25-2010, 10:50 AM	#4
NMs14.5kouki Zilvia Addict Join Date: Apr 2009 Location: Everywhere Age: 36 Posts: 654 Trader Rating: (38) Feedback Score: 38 reviews	do you have a stock blacktop sr ecu? whats the tune on the Enthalpy ecu? pm me prices on both too.

11-25-2010, 12:34 PM	#5
jarend Zilvia Junkie Join Date: Aug 2009 Location: San Diego Posts: 410 Trader Rating: (27) Feedback Score: 27 reviews	the splitfires are 380 brand new.. pm me if you are able to go any lower..

11-25-2010, 01:10 PM	#7
nxt774 Zilvia Member Join Date: Feb 2004 Location: Las Vegas, San diego, cincinnati Posts: 212 Trader Rating: (1) Feedback Score: 1 reviews	such a large collection of parts, registered since 2005, this is your first post, and listed as located in japan ..... hmmm either scam or the biggest lurker known to zilvia

11-25-2010, 01:19 PM	#8
P-Funk alot Zilvia Addict Join Date: Sep 2009 Location: 909 Age: 39 Posts: 831 Trader Rating: (7) Feedback Score: 7 reviews	just put it together and keep it man alot of time and money and your more then half way to beasting

11-25-2010, 04:07 PM	#10
JohnnyTyVan180sx Leaky Injector Join Date: Nov 2010 Location: Houston, TX Posts: 87 Trader Rating: (4) Feedback Score: 4 reviews	spec flywheel interested..

11-30-2010, 09:58 AM	#11
hennajapagaijin Join Date: Jul 2005 Location: , Aomori-ken, Japan Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	Bump.......

11-30-2010, 12:08 PM	#12
thenucci24 Join Date: May 2010 Location: fort wayne, in Age: 36 Posts: 37 Trader Rating: (1) Feedback Score: 1 reviews	how much for sr20det starter shipped to 46815 and what is the condition?

12-09-2010, 08:29 AM	#13
chibich Leaky Injector Join Date: Oct 2007 Location: richmond Posts: 62 Trader Rating: (2) Feedback Score: 2 reviews	stock sr20 cams? shipped to 23233

12-09-2010, 09:28 AM	#14
schrapnel85 Zilvia Member Join Date: Feb 2010 Location: wilkie sk/moose jaw sk, canada Age: 39 Posts: 224 Trader Rating: (11) Feedback Score: 11 reviews	great prices! check out prepped blocks or prepped heads on mazworx and compare! those items would be a steal! and of course this comes up at xmas! GLWS

12-09-2010, 09:38 AM	#15
leekim240 Leaky Injector Join Date: Oct 2010 Location: Florida Age: 36 Posts: 55 Trader Rating: (3) Feedback Score: 3 reviews	hey are you willing to part with the wastgate. Let me know asap

12-26-2010, 09:24 PM	#16
titangts Zilvia Addict Join Date: Jul 2009 Location: charlotte Posts: 666 Trader Rating: (10) Feedback Score: 10 reviews	PM sent!! check it dude! thanks

12-27-2010, 02:45 AM	#17
v8kllr240sx Zilvia Member Join Date: Sep 2010 Location: florida Age: 35 Posts: 202 Trader Rating: (4) Feedback Score: 4 reviews	Head studs shipped to 33870 pm me

12-27-2010, 01:43 PM	#18
zxc4 Leaky Injector Join Date: May 2010 Location: Orlando Posts: 89 Trader Rating: (8) Feedback Score: 8 reviews	PM me if you will part with the "oil/coolant lines" from the turbo kit

12-28-2010, 04:56 PM	#20
gotta240 Post Whore! Join Date: Dec 2005 Location: so cal Posts: 3,496 Trader Rating: (21) Feedback Score: 21 reviews	How much for the sr20 ps pump? Or just that little bracket bolted to it behind the pulley?

12-28-2010, 07:24 PM	#21
sr20time Zilvia Junkie Join Date: Oct 2010 Location: canada Posts: 597 Trader Rating: (8) Feedback Score: 8 reviews	\how much for oe water pump+timing chain shipped? also might be wanting the rocker arm stoppers.

12-28-2010, 07:53 PM	#22
RHDskyline Zilvia Member Join Date: Jan 2010 Location: Alberta Canada Posts: 175 Trader Rating: (2) Feedback Score: 2 reviews	sr ps pump? price? PM ME

01-16-2012, 10:10 PM	#24
didderson Zilvia Member Join Date: Apr 2006 Location: Phila/Lancaster, PA Age: 39 Posts: 291 Trader Rating: (6) Feedback Score: 6 reviews	what diameter injector openings is that fuel rail? __________________

01-16-2012, 11:07 PM	#25
JDGrimReaper666 Zilvia Addict Join Date: Jun 2009 Location: 619 Posts: 676 Trader Rating: (21) Feedback Score: 21 reviews	Will the ras fit a s14 sr20? If so, pm me __________________ "Show no compassion, like having a straight face orgasm"

01-19-2012, 08:47 PM	#26
wangan_cruiser kouki man Join Date: Apr 2006 Location: downtown oakland,ca Age: 40 Posts: 3,539 Trader Rating: (36) Feedback Score: 36 reviews	main studs are used or bnib just open to check?

01-19-2012, 10:34 PM	#27
speedgod^s13 Post Whore! Join Date: Nov 2004 Location: Honolulu, Hawaii Age: 45 Posts: 3,194 Trader Rating: (27) Feedback Score: 27 reviews	Wow, a thread from 2 thousand fucking 10.

01-19-2012, 10:34 PM	#28
1slicktwo4oh Zilvia Addict Join Date: Dec 2010 Location: los angeles Age: 41 Posts: 949 Trader Rating: (45) Feedback Score: 45 reviews	Price on rocker arms ship to 90605

01-19-2012, 10:45 PM	#29
Speedy Claxton Join Date: Feb 2009 Location: Beaumont, Tx Age: 44 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	S13 ps pump and brackets shipped to 77657.