A good tune for less than 1000$

[mattsil80wis]

i can understand being turned away because of the detonation, but 1 going bad out of a shit ton is not to shabby as a tuner. No tuner is perfect and stuff like that happens

not trying to put hate on nistune or you as a tuner just saying that ive had 10,xxx miles on my car with this wolf tune and no problems to date and know of a bunch of other ppl that have jwt and are happy

jwt mail order tune got me 403hp on a 2871r.64 right out of the box...kinda interested to see what a retune is gonna do

the thing i would be worried about with nistune is 1. pushing the limits in tuning the car (and possibly blowing it up and not being able to afford another built motor) 2. always changing the settings around

[4x4le]

Originally Posted by mattsil80wis

i can understand being turned away because of the detonation, but 1 going bad out of a shit ton is not to shabby as a tuner. No tuner is perfect and stuff like that happens

not trying to put hate on nistune or you as a tuner just saying that ive had 10,xxx miles on my car with this wolf tune and no problems to date and know of a bunch of other ppl that have jwt and are happy

jwt mail order tune got me 403hp on a 2871r.64 right out of the box...kinda interested to see what a retune is gonna do

the thing i would be worried about with nistune is 1. pushing the limits in tuning the car (and possibly blowing it up and not being able to afford another built motor) 2. always changing the settings around

403rwhp on a .64? what were you revving to and did you have cams? And what dyno. Just curious.

[codyace]

Originally Posted by 4x4le

403rwhp on a .64? what were you revving to and did you have cams? And what dyno. Just curious.

Same dyno as mine, similar/exact setup as well. I made same HP, and recently made 390 with added 4.6 gear and 19 psi (so we'll figure over 400 again with 20 psi)

Jim Wolf S3 cams
7850 RPM limit
Dynojet with a 1000 lb roller (aka: the 'load-less' monster)