My brand new clutch slips - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

BILLFISHER21 · 01-31-2011, 03:36 PM

^ haha because air in the system would cause the clutch not to disengage. The opposite of the op's problem lol. Heres the deal most likely the clutch master cylinder rod is adjusted to far and not allowing the clutch to actually engage. There has to be a little slop in the pedal. Make sure there is atleast 1/4 in. play.

Scenario #2 Dude who cut the flywheel could have cut a 2stage flywheel and made it a 1 stage thats not as likely but also possible check the clutch pedal first!!

01-31-2011, 03:36 PM	#24
BILLFISHER21 Zilvia Member Join Date: Apr 2008 Location: west palm beach Posts: 168 Trader Rating: (10) Feedback Score: 10 reviews	^ haha because air in the system would cause the clutch not to disengage. The opposite of the op's problem lol. Heres the deal most likely the clutch master cylinder rod is adjusted to far and not allowing the clutch to actually engage. There has to be a little slop in the pedal. Make sure there is atleast 1/4 in. play. Scenario #2 Dude who cut the flywheel could have cut a 2stage flywheel and made it a 1 stage thats not as likely but also possible check the clutch pedal first!!