Adding Power Steering to a Sr20det?

[kazuo]

wow no1 kan type in dis bitch hahahaha

ugh *headache*

The car probably doesnt have PS because the person who did the swap was too lazy/stupid to get DOHC lines or mod the SOHC lines.

89-90 S13 chassis had the PS resevoir and lines on the PASSENGER side while the 91-94 chassis had them on the DRIVER side. To keep PS with a SR20DET motor in a 89-90 chassis, you need to ge the DOHC PS lines and resevoir, or take the SOHC return line, remove the hose & extension that go to the passenger side, carefully use a couple of box wrenches/pliers/whatevers to bend the metal return like UP towards the resevoir (make sure it doesnt kink), then just slightly bend the hi pressure line across the bottom of the engine bay (use a zip tie to secure it) until it can reach the pump.

Problem solved.

I used to run mine using the ghetto SOHC line method and it worked fine.. I'm going DOHC lines now. :P