![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Post Whore!
![]() |
oil filter relocation install HELP
Retarded question....i know.
But what is the path of flow for an oil filter relocation kit with cooler? There are two holes on the adapter that goes to the block, and two holes on the oil filter relocation block. Which is in/out on both of these? Basically, one port flows directly into the middle of the filter, the other flows to the outer circle of the filter. Which is in, which is out? Thanks guys. |
![]() |
![]() |
Sponsored Links |
![]() |
#2 |
Leaky Injector
![]() |
I'm fairly certain that if you look at the block adaptor the hole on the left is out and the hole on the right is in.
On the filter the hole in the middle of the filter is in, and the one offset to the side is out. ![]() Last edited by s14_sr20_silvia; 03-15-2011 at 06:30 AM.. Reason: Found a picture to demonstrate. |
![]() |
![]() |
![]() |
Bookmarks |
|
|