engine/engine bay photos - Page 35 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

hartig · 04-05-2011, 10:33 PM

Quote:

Originally Posted by harrypotter

eng bay when I got it

any reason you ditched the fmic? (i mean, unless you just got a front mount with piping on one side)

harrypotter · 04-05-2011, 11:00 PM

Quote:

Originally Posted by hartig

any reason you ditched the fmic? (i mean, unless you just got a front mount with piping on one side)

The first date between the side of a mountain and the FMIC didnt work out too well! FMIC got his heart broken!

That and I hate FMIC unless have a need for them, but with stock turbo my Blitz sidemount is great!

Wake · 04-05-2011, 11:45 PM

Quote:

Originally Posted by Flicktitty

Question to those who are deleting/relocating the brake lines from on the firewall, instead of buying the $200 Chase bay's kit, couldn't i just get a few fittings and brake line from auto zone, and bend it in a 90° and go down to the crossmember and then over to where the rest of the lines going to the front passenger wheel and the rear wheels go?

Me and a buddy are going to be doing our own similar kit. I can let you know the specs and products we use if you need.

I was also considering re-routing/making new hardlines. but realized we could do it this way.

tinys s14 · 04-06-2011, 09:02 AM

Quote:

Originally Posted by WakeBHR

Me and a buddy are going to be doing our own similar kit. I can let you know the specs and products we use if you need.

I was also considering re-routing/making new hardlines. but realized we could do it this way.

if you can do the same for me that would be cool

h11m1vn · 04-06-2011, 09:27 AM

Quote:

Originally Posted by WakeBHR

Me and a buddy are going to be doing our own similar kit. I can let you know the specs and products we use if you need.

I was also considering re-routing/making new hardlines. but realized we could do it this way.

How about making a thread about it?

sftmb · 04-06-2011, 10:31 AM

nothing too fancy... I recently sprayed my type-x S13 in LP2 midnight purple. lol I'll be sure to get better quality pics later when the motor's put in n everything. lol

Flicktitty · 04-06-2011, 11:13 AM

Quote:

Originally Posted by WakeBHR

Me and a buddy are going to be doing our own similar kit. I can let you know the specs and products we use if you need.

I was also considering re-routing/making new hardlines. but realized we could do it this way.

Yes that would be great. i'd like to see what you guy's come up with i might try and see what i can do with hardlines

HouseElf · 04-09-2011, 03:03 AM

*kognition* · 04-09-2011, 10:11 AM

Nice work!!!

Quote:

Originally Posted by HouseElf

Emeru · 04-09-2011, 10:50 AM

what is the best method to clean/wash your engine bay ?

JDM SPUG · 04-09-2011, 10:56 AM

Quote:

Originally Posted by Emeru

what is the best method to clean/wash your engine bay ?

I would recommend detailers pride engine degreaser from autogeek.net out P21S auto wash.
They both work very well. I will post up pics of my engine bay before and after I clean my engine bay.

Emeru · 04-09-2011, 11:01 AM

Quote:

Originally Posted by JDM SPUG

I would recommend detailers pride engine degreaser from autogeek.net out P21S auto wash.
They both work very well. I will post up pics of my engine bay before and after I clean my engine bay.

please do im really intrested.

JDM SPUG · 04-09-2011, 11:28 AM

Quote:

Originally Posted by Emeru

please do im really intrested.

I have a before and after of when I cleaned my subaru ill try and post that up for u just so u can see how clean u can make a car wirth 60k on it.

Emeru · 04-09-2011, 01:31 PM

Quote:

Originally Posted by JDM SPUG

I have a before and after of when I cleaned my subaru ill try and post that up for u just so u can see how clean u can make a car wirth 60k on it.

so simply buy the engine cleaner spray it around wipe with a rag then simply rinse off ??

JDM SPUG · 04-09-2011, 01:38 PM

Quote:

Originally Posted by Emeru

so simply buy the engine cleaner spray it around wipe with a rag then simply rinse off ??

NO NO NO.

with the engine not being hot.

1st what i do is cover any areas that i don't want to get wet like the distributor, the intake opening, etc. etc..

2nd hose down the areas that i do want to cleaner with a VERY gentle steam of water, if you have a hose that has a mist setting that is even better. then i use my detailer's pride engine degreaser

let it sit 2-3 mins then i agitate is with a detailer brush (kinda like a paint brush but not quite).

3rd rinse it all off, then i use my air blower and get as much water out like that they turn the engine on the heat up and dry off.

WanganNastyMachine · 04-09-2011, 01:55 PM

Looking forward to seeing pics of that Midnight Purple car floating around.

That matte black engine bay is really cool, it looks clean and organized. Neat paint choice and props for making a matte color not look ghetto!

HouseElf · 04-10-2011, 10:47 PM

Quote:

Originally Posted by kognition

Nice work!!!

Quote:

Originally Posted by WanganNastyMachine

Looking forward to seeing pics of that Midnight Purple car floating around.

That matte black engine bay is really cool, it looks clean and organized. Neat paint choice and props for making a matte color not look ghetto!

thanks guys, really pleased with how it came out, looking forward to see how it looks with the strut tower bar on

sr20detconv · 04-15-2011, 05:57 PM

jdmspooge · 04-17-2011, 01:57 AM

Here's mine. Tried to make it as stock as possible. Not much, but it is what it is... Enjoy! Any questions, LMK!

towlie · 04-17-2011, 02:15 AM

I think its rad when people go out of their way to make a KA-t setup look stock

Sleeper status ftw!

NissanEnthus · 04-17-2011, 02:19 AM

Quote:

Originally Posted by jdmspooge

Here's mine. Tried to make it as stock as possible. Not much, but it is what it is... Enjoy! Any questions, LMK!

Is that custom heat sheild? props on the stealth install

kaking · 04-17-2011, 02:20 AM

that really is impressive^

jdmspooge · 04-17-2011, 02:22 AM

I fab'd the heatshield with a english wheel and a ball hammer and trimmed to shape. It was tedious, but pays off in the end.

jdmspooge · 04-17-2011, 02:23 AM

I would like to do a wire tuck some day, but I don't know how it would look when reverting to stock placement.

Zach-sr · 04-17-2011, 11:51 AM

Mine.

Lil_D · 04-17-2011, 12:30 PM

i just finished spraying mine

XxCAPTAINxX · 04-17-2011, 05:45 PM

hey zach take off all those dumb stickers and get either a new oem overflow tank or something different. with that all done your engine bay will look 100% better.

s13 @ fullboost · 04-17-2011, 06:05 PM

Zach-sr · 04-17-2011, 08:06 PM

Quote:

Originally Posted by XxCAPTAINxX

hey zach take off all those dumb stickers and get either a new oem overflow tank or something different. with that all done your engine bay will look 100% better.

Yeah I pretty much immediately regretted the stickers. But the hoses look a thousand times better when I have them covered in braided sleeving. I really am not a fan of the stock catch tanks location.

speedfiend · 04-18-2011, 05:28 PM

Well unfortunately no engine shots to show off just yet!!!! Still need to machine my block and by some rods. But the engine bay is basically done and awaiting the motor. Relay/Fuse Box relocation to under the dash, full custom harness done by myself with only the full lighting wiring, and electric fan wiring going forward of the firewall. Battery relocation to the trunk with cut off switch. Wires coming out of the pass side firewall are to connect to the starter and lower harness and such. Left em long until I get the motor in and finish the wire tuck. Got a lot of ideas and inspiration here so figured Id show off what it all accumulated too!!!!
Cameron

04-06-2011, 10:31 AM	#1026
sftmb Leaky Injector Join Date: Nov 2008 Location: Mukilteo,WA Age: 35 Posts: 124 Trader Rating: (0) Feedback Score: 0 reviews	nothing too fancy... I recently sprayed my type-x S13 in LP2 midnight purple. lol I'll be sure to get better quality pics later when the motor's put in n everything. lol __________________

04-09-2011, 03:03 AM	#1028
HouseElf Zilvia Member Join Date: Dec 2009 Location: Vegas Posts: 204 Trader Rating: (0) Feedback Score: 0 reviews	__________________

04-17-2011, 11:51 AM	#1045
Zach-sr Leaky Injector Join Date: Jul 2010 Location: Greeneville, TN Age: 35 Posts: 98 Trader Rating: (0) Feedback Score: 0 reviews	Mine. __________________

04-17-2011, 05:45 PM	#1047
XxCAPTAINxX Zilvia Member Join Date: May 2010 Location: hillsboro Age: 37 Posts: 181 Trader Rating: (0) Feedback Score: 0 reviews	hey zach take off all those dumb stickers and get either a new oem overflow tank or something different. with that all done your engine bay will look 100% better. __________________

04-17-2011, 06:05 PM	#1048
s13 @ fullboost Post Whore! Join Date: Dec 2007 Location: St.Petersburg,FL Posts: 2,550 Trader Rating: (15) Feedback Score: 15 reviews	__________________

04-09-2011, 10:50 AM	#1030
Emeru Leaky Injector Join Date: Aug 2010 Location: Miami Age: 32 Posts: 135 Trader Rating: (1) Feedback Score: 1 reviews	what is the best method to clean/wash your engine bay ?

04-09-2011, 01:55 PM	#1036
WanganNastyMachine Zilvia Junkie Join Date: Jan 2011 Location: Maryland, USA Age: 33 Posts: 468 Trader Rating: (3) Feedback Score: 3 reviews	Looking forward to seeing pics of that Midnight Purple car floating around. That matte black engine bay is really cool, it looks clean and organized. Neat paint choice and props for making a matte color not look ghetto!

04-15-2011, 05:57 PM	#1038
sr20detconv Zilvia Member Join Date: Nov 2006 Location: Quebec Age: 36 Posts: 176 Trader Rating: (0) Feedback Score: 0 reviews

04-17-2011, 01:57 AM	#1039
jdmspooge Post Whore! Join Date: Jan 2006 Location: San Diego Posts: 2,609 Trader Rating: (39) Feedback Score: 39 reviews	Here's mine. Tried to make it as stock as possible. Not much, but it is what it is... Enjoy! Any questions, LMK!

04-17-2011, 02:15 AM	#1040
towlie Post Whore! Join Date: Jun 2009 Location: Pacific NorthWest Posts: 2,500 Trader Rating: (11) Feedback Score: 11 reviews	I think its rad when people go out of their way to make a KA-t setup look stock Sleeper status ftw!

04-17-2011, 02:20 AM	#1042
kaking Users Awaiting Email Confirmation Join Date: Apr 2007 Location: san jose CA Posts: 433 Trader Rating: (7) Feedback Score: 7 reviews	that really is impressive^

04-17-2011, 02:22 AM	#1043
jdmspooge Post Whore! Join Date: Jan 2006 Location: San Diego Posts: 2,609 Trader Rating: (39) Feedback Score: 39 reviews	I fab'd the heatshield with a english wheel and a ball hammer and trimmed to shape. It was tedious, but pays off in the end.

04-17-2011, 02:23 AM	#1044
jdmspooge Post Whore! Join Date: Jan 2006 Location: San Diego Posts: 2,609 Trader Rating: (39) Feedback Score: 39 reviews	I would like to do a wire tuck some day, but I don't know how it would look when reverting to stock placement.

04-17-2011, 12:30 PM	#1046
Lil_D Zilvia Addict Join Date: Nov 2010 Location: The Bay Area Age: 32 Posts: 733 Trader Rating: (5) Feedback Score: 5 reviews	i just finished spraying mine

04-18-2011, 05:28 PM	#1050
speedfiend Zilvia FREAK! Join Date: Feb 2002 Location: Destin, Fl./Houston, Tx. Age: 40 Posts: 1,206 Trader Rating: (68) Feedback Score: 68 reviews	Well unfortunately no engine shots to show off just yet!!!! Still need to machine my block and by some rods. But the engine bay is basically done and awaiting the motor. Relay/Fuse Box relocation to under the dash, full custom harness done by myself with only the full lighting wiring, and electric fan wiring going forward of the firewall. Battery relocation to the trunk with cut off switch. Wires coming out of the pass side firewall are to connect to the starter and lower harness and such. Left em long until I get the motor in and finish the wire tuck. Got a lot of ideas and inspiration here so figured Id show off what it all accumulated too!!!! Cameron