![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
s13 diff options
im going to be running an rb motor and will be using an s13 vlsd diff just wanted to know what options are out there if i wanted to change gear ratios or lsd center in this diff?
|
|
![]() |
![]() |
Sponsored Links |
![]() |
#3 |
Zilvia Junkie
![]() Join Date: Nov 2008
Location: FT Campbell, KY.
Posts: 329
Trader Rating: (2)
![]() Feedback Score: 2 reviews
|
All depends on how u plan on using the car if it's just a dd and something to play around in a z32 or j30 will be fine if u want to keep the s13 pumpkin then get a real LSD like a. Tomei or something of the sort
|
![]() |
![]() |
![]() |
#4 |
Advertiser
![]() Join Date: Dec 2010
Location: Los Angeles, CA (91423)
Age: 35
Posts: 478
Trader Rating: (87)
![]() Feedback Score: 87 reviews
|
j30
z32 r32 s15 q45 jdm 180sx vlsd rb25 or higher - I would recommend a diffs above for a smooth driving daily. stock rb20 - stock s14 vlsd will be fine or the names above Like herbie mentioned above, its all about what you want out of your car.
__________________
LIKE 9K Racing On Facebook for discount and product updates. ![]() Contact 9K racing for any of your tuning or modifying needs. |
![]() |
![]() |
![]() |
#5 |
ok
im using an rb20det check out my specs below Engine………………………. *Nissan RB20DET motor (r32 skyline gts-t) *(standard internals) *Rebuilt with OEM Nissan engine kit *ACL conrod bearings *Garrett GT3582R twin ball bearing turbo *internal waste gate *3" down pipe *1.5" wastgate screamer pipe *3" free flow stainless exhaust *Apexi n1 tail pipe *TurboXS manual boost controller *Blitz Dual Drive Blow Off Valve *3” aluminum turbo inlet pipe *LM 3" intercooler *2.5” alu intercooler piping *Custom fabricated rb26dett side mount intake manifold (alu welded & ported) *Apexi power FC D-JETRO stand alone engine management system *Apexi FC hand held Commander *Sti map sensor *Fidanza 4.3 ceramic clutch kit *champion platinum power spark plugs *Walbro 225lph external fuel pump *3core radiator *Running on castrol 20w50 synthetic motor oil so i need sum that will stand up to the power i never used a s13 vlsd rear end in my life so i dont know how strong they are and was looking fo a 4.11 ratio so want to know what bolts up directly in the s13 vlsd diff |
|
![]() |
![]() |
![]() |
#6 |
Advertiser
![]() Join Date: Dec 2010
Location: Los Angeles, CA (91423)
Age: 35
Posts: 478
Trader Rating: (87)
![]() Feedback Score: 87 reviews
|
what is your budget?
I can give you high to low options since modifying a car relies on 1 thing - MONEY
__________________
LIKE 9K Racing On Facebook for discount and product updates. ![]() Contact 9K racing for any of your tuning or modifying needs. |
![]() |
![]() |
![]() |
#8 |
Advertiser
![]() Join Date: Dec 2010
Location: Los Angeles, CA (91423)
Age: 35
Posts: 478
Trader Rating: (87)
![]() Feedback Score: 87 reviews
|
I don't know how much power a stock diff can take but since you are running about 500-600hp depending on your tune, I am pretty sure you will be breaking axles/diffs if you are drifting with it.
I advise using a nice aftermarket 1.5 way like a carbonetics lsd. On a different note, I don't see how your oem rebuilt rb20 will stand up to the punishment of a high boost 35r setup without expensive internals + work. As far as normal daily driving with some occasional spirited moments in between, I would say your z32/j30/q45 diff would be a decent option. if you have the money to spend (around 2k) get a quickchange diff.
__________________
LIKE 9K Racing On Facebook for discount and product updates. ![]() Contact 9K racing for any of your tuning or modifying needs. |
![]() |
![]() |
![]() |
Bookmarks |
|
|