Differential questions

[japslapsilvia]

Originally Posted by dirt114

300zxClub.com (Nissan 300ZX Forums)

if anyone is on 3zc i started a thread there and found a few solutions for my z32 and posted the info. still not sure on the s13 situation. if the z32 na R200 will bolt right into the s13 then I think I can just use the na z32 hubs and axles as well. can anyone confirm this?

z32 NA diff will bolt into s13 with s13 rear cover, that is what i have in my s13.
also you have to use J30 Axles, z32 is to long.

[dirt114]

Originally Posted by japslapsilvia

z32 NA diff will bolt into s13 with s13 rear cover, that is what i have in my s13.
also you have to use J30 Axles, z32 is to long.

are you saying do this with z32 hubs as well? and two rear 2+2 ebrake cables (think I read that somewhere) if I use all the z32 rear brakes? Thanks again

[japslapsilvia]

Originally Posted by dirt114

are you saying do this with z32 hubs as well? and two rear 2+2 ebrake cables (think I read that somewhere) if I use all the z32 rear brakes? Thanks again

yes for 5lug conversion you can use the NA hubs.

but u have to use J30 axles or JDM 5 bolt s13 axles. z32 will not fit, they are too long.

for e-brake...2+2 cables (you will have to make a simple bracket to mount cables..i can post pics of mine if you need)....backing plate and all hardware..rotor and caliper. alll will bolt up to stock s-13 upright.