Pulling Exhaust mani help... Stuck!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Luvs2slide · 05-04-2011, 07:45 PM

Unbolt the elbow from the DP. Pull it all out together...Manifold, turbo, and elbow.

It will come out...w/ finesse.

GL

Darren · 05-05-2011, 07:30 AM

Quote:

Originally Posted by Luvs2slide

Unbolt the elbow from the DP. Pull it all out together...Manifold, turbo, and elbow.

It will come out...w/ finesse.

GL

This. and it'll help if you pull your cas & water outlet for space. (i'm assuming sr20det as you don't say)

WorkInProgress · 05-05-2011, 07:48 PM

Thanks for all the responses guys. I got everything out today. This is the first time I've had to pull it all.

I've resurfaced everything with wire brush and some sand paper. I had a few studs come out instead of the nut coming off. When I go to put it all back together what should I use to get a good seal?

Permatex for the gaskets? Loctite on the studs?

Thanks again.

WorkInProgress · 05-05-2011, 07:52 PM

BTW running S15 gaskets on the exhaust mani and where the mani meets the turbo.

05-04-2011, 07:45 PM	#1
Luvs2slide Zilvia FREAK! Join Date: Oct 2006 Location: NW Florida Age: 43 Posts: 1,490 Trader Rating: (81) Feedback Score: 81 reviews	Unbolt the elbow from the DP. Pull it all out together...Manifold, turbo, and elbow. It will come out...w/ finesse. GL __________________

05-05-2011, 07:48 PM	#3
WorkInProgress Leaky Injector Join Date: Mar 2005 Location: MS Posts: 64 Trader Rating: (1) Feedback Score: 1 reviews	Thanks for all the responses guys. I got everything out today. This is the first time I've had to pull it all. I've resurfaced everything with wire brush and some sand paper. I had a few studs come out instead of the nut coming off. When I go to put it all back together what should I use to get a good seal? Permatex for the gaskets? Loctite on the studs? Thanks again.

05-05-2011, 07:52 PM	#4
WorkInProgress Leaky Injector Join Date: Mar 2005 Location: MS Posts: 64 Trader Rating: (1) Feedback Score: 1 reviews	BTW running S15 gaskets on the exhaust mani and where the mani meets the turbo.