CA Wtt non abs driveshaft for abs driveshaft

[DRIFTO16]

I have a non abs driveshaft
with a brand new center support bushing that i bought from nissan
its in good condition but my car has
abs so im looking for an abs driveshaft in good shape
let me know if your interested
thnx =]

[jdm2191]

I got a S13 Non-ABS driveshaft for sale if your interested?

[DRIFTO16]

???
I dnt get it,
i posted that i have a non abs driveshaft and that i need n abs driveshaft because my car has
abs
why would u offer me a non abs driveshaft when i wanna get rid of mine?

[iLagX]

good luck with that man!! your better off changing to a non abs diff

[DRIFTO16]

Why is that?
True question not bieng an asshole
i realy wanna know
i didnt know there would be a difference....
Can u explain?

[LB240driftr]

Since u need abs u could opt to get urs shortened at a shop..I guess u have s13 which is usually the cheaper than s14 but if u can't find one it's like $65 including a balance

[DRIFTO16]

So i can go to a shop and have it shortend?
And yes its
a s13 =]
idk i have vlsd and abs
but this driveshaft is making a little noise and vibration on deaceleration
and
yeah how much am i supposed to shorten it?
And from where from the front??

[LB240driftr]

Originally Posted by DRIFTO16

So i can go to a shop and have it shortend?
And yes its
a s13 =]
idk i have vlsd and abs
but this driveshaft is making a little noise and vibration on deaceleration
and
yeah how much am i supposed to shorten it?
And from where from the front??

It would be shortened at the weld on the rear most part of the shaft in front of the u joint..
Most likely the noise and vibration is from jamming the shaft into the tranny to far..it could damage ur tranny with too much pressure u should have a lil play room so get it fixed asap..also it could be slightly warped from this also thus wen it is shortened it will get a rebalance
Mine was shortened like 1 1/4 inches so it doesnt take much believe me

[DRIFTO16]

Oh i see thats
some helpful info.
Well my old tranny had that peace at the end of the tranny taken off im guessing to let the driveshaft fit in
but my tranny recently had its 5th gear syncro go bad so i got
another tranny
but this one still has that little dist cover thing
do u think ima have a problem fitting the driveshaft i already have on my car?

[LB240driftr]

I had a 1 piece so I dropped the diff and just forced it up into place..itl be easier to miss since urs bends in the middle but if it doesn't feel right n isn't going in nice n smooth most likely it is the wrong one..also they told me my u joints got a lil warped just from jamming it in there but luckily not out of spec which would also cause a lot of vibration...try measuring it and if u want more info give these guys a call they are legit n will answer any questions about what exact size u need n stuff
+1 (714) 901-3611
Powertrain industries

[DRIFTO16]

Hey thnx for helping me out im agive them a call and see what thewy say =]

[LB240driftr]

Glad I could help..wish someone helped me it was a bitch..drove all the way to San Diego from long beach for that damn driveshaft 2 lol!

[DRIFTO16]

Yeah i called them and they helped me out they said that
abs has nothing to do with the driveshaft
but i dnt understand why people say heeey
i have a non abs drivshaft for sale
or heeey i have an abs driveshaft forsale
why would they say it if it doesnt matter?
Any how yeah he said it
can be a number of things
ima see if i can find a one piece driveshaft for super cheap on here =]