PBM spacers 15mm vs rota p45r 17x9.5 +12

[wh0aitznic0]

Originally Posted by zooopreme

I have 15mm spacers from PBM as shown here:



Don't most spacers look like this? Why wouldn't p45's fit for more poke...

EDIT: I think they wouldn't fit because of the excess from your old studs. P45's may not have holes to accommodate for it. 15mm doesn't cover the old studs up.

Here's a better pic but when you mount the spacers, you tighten nuts on the old lug mounts and there is still some excess left. One way to correct the excess is to cut/grind it off.
^And yes, I put the bolts on the wrong way. I realized that after I took the picture and proceeded to fix it

What are those Nissan emblem shaped things on the spacer? First time I've ever seen and I used to have PBM spacers.

[zooopreme]

Originally Posted by wh0aitznic0

What are those Nissan emblem shaped things on the spacer? First time I've ever seen and I used to have PBM spacers.

that's the rear side of the spacers. That's the bottom part of the extended studs.