ka oil pan removal

[nep]

Originally Posted by roel03

All you do it loosen the top nut on the motor mounts. Leave them threaded a little at the top, but do not loosen them all the way. Jack the car where the motor meets tranny and it will be high enough to slide the oil pan out. Did not need to remove anything, besides tilting the sway bar forward to give some extra room. It will be a pain to unbolt the oil pickup and put it back on, but it is doable. Use a felpro gasket, not gasket maker and it will make your life much easier putting it back on if you use this method.

spot on. did it this way and never ran into a problem