How to properly do a DIY boost/vacuum leak test?

[96Turbo]

attach the plug you made onto the intake flange of the turbo (unhook intake pipe).

this way you can make sure the pipe off the compressor doesn't leak.

set the pressure regulator on your air compressor to ~15psi (or whatever you plan to boost), and pressurize the system. you should be able to hear air rushing out if you have a leak. a spray bottle of soapy water also helps find them.

[jakez]

Originally Posted by 96Turbo

attach the plug you made onto the intake flange of the turbo (unhook intake pipe).

this way you can make sure the pipe off the compressor doesn't leak.

set the pressure regulator on your air compressor to ~15psi (or whatever you plan to boost), and pressurize the system. you should be able to hear air rushing out if you have a leak. a spray bottle of soapy water also helps find them.

Well I wanted to hook it up on the end part of my intake to make sure the intake couplings also aren't leaking, but as long as I'm testing from the right place I'm happy. Thanks!