need help s13 sr20det wont start - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

oaksman513 · 10-07-2011, 03:22 PM

Timing chain is good. So today we put a different ecu in the car. It started but wouldnt shut off when you pulled out the key. And after several testing procedures the new ecu burnt up. Also the original ecu had the ecu power strip on the board burn up. Also if we jiggled around to ecu harness it would get power and start but trying to find that short causes it to burn up. So what does someone think about this. I tried to explain the best I could. Thanks again to all!

10-07-2011, 03:22 PM	#1
oaksman513 Zilvia Addict Join Date: Aug 2011 Location: cincinnati ohio Age: 41 Posts: 748 Trader Rating: (28) Feedback Score: 28 reviews	Timing chain is good. So today we put a different ecu in the car. It started but wouldnt shut off when you pulled out the key. And after several testing procedures the new ecu burnt up. Also the original ecu had the ecu power strip on the board burn up. Also if we jiggled around to ecu harness it would get power and start but trying to find that short causes it to burn up. So what does someone think about this. I tried to explain the best I could. Thanks again to all!