radiator relocation

[Slo_240sx]

Originally Posted by Fred Allen Burge

Here ya go, AFC-80107N from Summit. I think I'll have to run a surge tank to get it to bleed right, might get away with just putting a rad cap in the upper rad pipe but it's iffy.

Thanks Fred! I think an inline fill tube and cap on the upper hose should suffice.

Here is info for the AFC-80107N Radiator:



Afco #80107N Scirocco-Style Radiator...$256.95

Overall Height...13-1/4"

Tank Height...12-1/2"

Tank Width (Top)...21-1/2"

Tank Width (Bottom)...21-1/2"

Width With Flanges...25-1/2"

Tank Thickness...3"

Filler Location...None

Inlet Size and Location...1-1/4"...Right Side

Outlet Size and Location...1-1/4"...Right Side

Dry Weight...8.1 pounds

Moroso 63745 Radiator Hose Filler Inline 1 1/4"

[mantas]

Originally Posted by Slo_240sx

Thanks Fred! I think an inline fill tube and cap on the upper hose should suffice.

Here is info for the AFC-80107N Radiator:



Afco #80107N Scirocco-Style Radiator...$256.95

Overall Height...13-1/4"

Tank Height...12-1/2"

Tank Width (Top)...21-1/2"

Tank Width (Bottom)...21-1/2"

Width With Flanges...25-1/2"

Tank Thickness...3"

Filler Location...None

Inlet Size and Location...1-1/4"...Right Side

Outlet Size and Location...1-1/4"...Right Side

Dry Weight...8.1 pounds

Moroso 63745 Radiator Hose Filler Inline 1 1/4"

Winning!

I'm going to slang my Altima fans and radiator to swap in this radiator + r33 clutch fan.....

[Matej]

Originally Posted by Slo_240sx

Moroso 63745 Radiator Hose Filler Inline 1 1/4"

Bought this same filler as well, however, while the outer diameter may be 1.25" on everything, the thickness of the walls on the stock radiator, 16V/Scirocco radiator, and the filler all vary, thus resulting in different inner diameters.
The inner diameter of the inlet and outlet on the stock radiator is 31mm, while the 16V radiator is 28mm, and the walls on the inline filler are really thick, and so the inner diameter is only 26mm. Will it be safe to use?