Dropping cylinder 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

rahjah · 02-02-2012, 08:16 PM

I am losing number two cylinder in my 92 240 with the ka24de. I have spark and isn't all the time. I was thinking the number one and number two injectors and seeing if the problem moves. Would this be the next best thing to do? Also, I just replaced the cap and rotor and the car ran great to the gas station and ran on three cylinders on the way back.

rahjah · 02-02-2012, 08:23 PM

I was thinking of replacing the fuel filter but the problem seems lie in the number 2 cylinder only. When it is running poorly, I can pull cylinders 1, 3 and 4 plug wires and the engine bogs way down. However, when I pull the number 2 plug wire, nothing changes.

rcdad123 · 02-02-2012, 08:36 PM

how does the spark plug on cyl 2 looks like compared to the other 3 cylinders?

rahjah · 02-02-2012, 08:39 PM

I only looked at the numbers 1 and 2 plugs for a comparison and the both look the same, and smell the same.

rahjah · 02-03-2012, 02:06 PM

I think that I may have narrowed it down to a bad ignition control module.

Walperstyle · 02-03-2012, 04:28 PM

try swapping injectors first with a different cylinder see if the problem follows the injector to a different cylinder.

rahjah · 02-03-2012, 04:31 PM

I tried swapping the injectors today but I was unable to get them out. I almost broke the top off of the number 1 injector trying to pull,pry it out. Is there a safe/easy way to do this. Also, I took the ICM to work (Advance Auto Parts) and tested it, it failed twice in a row.

rahjah · 02-04-2012, 05:09 PM

Swapped injectors 1 and 2 today, the problem followed the number 2 injector. Replaced injector, all is well.

Walperstyle · 02-04-2012, 05:27 PM

Right on buddy!

02-02-2012, 08:16 PM	#1
rahjah Leaky Injector Join Date: Jan 2012 Location: Hendersonville, NC Age: 42 Posts: 79 Trader Rating: (0) Feedback Score: 0 reviews	Dropping cylinder 2 I am losing number two cylinder in my 92 240 with the ka24de. I have spark and isn't all the time. I was thinking the number one and number two injectors and seeing if the problem moves. Would this be the next best thing to do? Also, I just replaced the cap and rotor and the car ran great to the gas station and ran on three cylinders on the way back.

02-03-2012, 04:28 PM	#6
Walperstyle Nissanaholic! Join Date: Nov 2004 Location: Alberta, Red Derp Age: 44 Posts: 1,729 Trader Rating: (0) Feedback Score: 0 reviews	try swapping injectors first with a different cylinder see if the problem follows the injector to a different cylinder. __________________ KA-T ORG-Function over Flush

02-04-2012, 05:27 PM	#9
Walperstyle Nissanaholic! Join Date: Nov 2004 Location: Alberta, Red Derp Age: 44 Posts: 1,729 Trader Rating: (0) Feedback Score: 0 reviews	Right on buddy! __________________ KA-T ORG-Function over Flush

02-02-2012, 08:23 PM	#2
rahjah Leaky Injector Join Date: Jan 2012 Location: Hendersonville, NC Age: 42 Posts: 79 Trader Rating: (0) Feedback Score: 0 reviews	I was thinking of replacing the fuel filter but the problem seems lie in the number 2 cylinder only. When it is running poorly, I can pull cylinders 1, 3 and 4 plug wires and the engine bogs way down. However, when I pull the number 2 plug wire, nothing changes.

02-02-2012, 08:36 PM	#3
rcdad123 Zilvia Addict Join Date: Jul 2011 Location: san diego Posts: 639 Trader Rating: (0) Feedback Score: 0 reviews	how does the spark plug on cyl 2 looks like compared to the other 3 cylinders?

02-02-2012, 08:39 PM	#4
rahjah Leaky Injector Join Date: Jan 2012 Location: Hendersonville, NC Age: 42 Posts: 79 Trader Rating: (0) Feedback Score: 0 reviews	I only looked at the numbers 1 and 2 plugs for a comparison and the both look the same, and smell the same.

02-03-2012, 02:06 PM	#5
rahjah Leaky Injector Join Date: Jan 2012 Location: Hendersonville, NC Age: 42 Posts: 79 Trader Rating: (0) Feedback Score: 0 reviews	I think that I may have narrowed it down to a bad ignition control module.

02-03-2012, 04:31 PM	#7
rahjah Leaky Injector Join Date: Jan 2012 Location: Hendersonville, NC Age: 42 Posts: 79 Trader Rating: (0) Feedback Score: 0 reviews	I tried swapping the injectors today but I was unable to get them out. I almost broke the top off of the number 1 injector trying to pull,pry it out. Is there a safe/easy way to do this. Also, I took the ICM to work (Advance Auto Parts) and tested it, it failed twice in a row.

02-04-2012, 05:09 PM	#8
rahjah Leaky Injector Join Date: Jan 2012 Location: Hendersonville, NC Age: 42 Posts: 79 Trader Rating: (0) Feedback Score: 0 reviews	Swapped injectors 1 and 2 today, the problem followed the number 2 injector. Replaced injector, all is well.