Power FC D'jetro, whats in the box?

[Jake1992]

Well guys , i bought the car with stock ecu installed and a power fc with it ...
The rumour going around is that no one could make it work with the power fc, the car has a z32 maf installed now, when i finally got my datalogit , i found out that in setting 3 there was no maf options but map so i figured its a djetro. Thats what the datalogit reads from the PFC.

So i dint buy one i just have one...

how does the temp sensor wire up ?

[jspaeth]

Originally Posted by Jake1992

Well guys , i bought the car with stock ecu installed and a power fc with it ...
The rumour going around is that no one could make it work with the power fc, the car has a z32 maf installed now, when i finally got my datalogit , i found out that in setting 3 there was no maf options but map so i figured its a djetro. Thats what the datalogit reads from the PFC.

So i dint buy one i just have one...

how does the temp sensor wire up ?

Confused.......how is it D-Jetro but with a MAF installed and wired up?


Independent of that, wiring up that air temp sensor is really easy. I think there are just 2 wires, one of which is a ground, and the other which you have to had a pin to the ECU.......really not bad.

Do a search on here about it..........I did a write up a few years ago

[Jake1992]

Originally Posted by jspaeth

Confused.......how is it D-Jetro but with a MAF installed and wired up?


Independent of that, wiring up that air temp sensor is really easy. I think there are just 2 wires, one of which is a ground, and the other which you have to had a pin to the ECU.......really not bad.

Do a search on here about it..........I did a write up a few years ago

Thanks , look what i wrote.
I bought the car with the stock ecu installed, and got a power fc with it. just the ecu, nothing else. Bought a commander, and datalogit.
when i replaced the stock with the Power Fc the car wouldnt start. So i kept looking to change my maf settings (thinking it was Ljetro) but there are only map options. So from that point i got to know it was a Djetro. I am getting a 3 bar halltech map sensor today , would i be able to start without air temp sensor ?

[jspaeth]

Originally Posted by Jake1992

Thanks , look what i wrote.
I bought the car with the stock ecu installed, and got a power fc with it. just the ecu, nothing else. Bought a commander, and datalogit.
when i replaced the stock with the Power Fc the car wouldnt start. So i kept looking to change my maf settings (thinking it was Ljetro) but there are only map options. So from that point i got to know it was a Djetro. I am getting a 3 bar halltech map sensor today , would i be able to start without air temp sensor ?

Sorry, my bad. Not sure about that. You should be able to easily order the temp sensor from Apexi. Not sure if it will start and run properly without it.

It is also a Mazda part number.


Look up a thread I made about Power FC Intake Air Temp sensor install............