Water temp gauge

[ryandriftingfat]

I have one of these:


It uses a 1/8 NPT fitting, which is very common amongst senders you'd likely be using and included with many common gauges.

EDIT: Exact same size as your existing radiator hose, so cut your hose and put the adapter in between.

[slydin240sx]

Originally Posted by ryandevilhorns

I have one of these:


It uses a 1/8 NPT fitting, which is very common amongst senders you'd likely be using and included with many common gauges.

EDIT: Exact same size as your existing radiator hose, so cut your hose and put the adapter in between.

I have the PBM adapter as well. Works just fine!

Stop making shit difficult....

Buy the PBM one or any other one. Doesn't really matter. Cut upper radiator hose in half. Install adapter in between the two pieces. Clamp it all up. Install sender. Connect sender wires to gauge. Add coolant if needed. Bleed system. Have accurate water temp readings from now on. Like a bauce!.!.!