Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Chat

Chat General Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 04-04-2012, 10:17 AM   #1
MadScientist
Zilvia.net Advertiser
 
MadScientist's Avatar
 
Join Date: Mar 2003
Location: NOLA
Age: 48
Posts: 1,972
Trader Rating: (3)
MadScientist is just really niceMadScientist is just really niceMadScientist is just really niceMadScientist is just really niceMadScientist is just really niceMadScientist is just really niceMadScientist is just really niceMadScientist is just really niceMadScientist is just really niceMadScientist is just really nice
Feedback Score: 3 reviews
1. take it to any muffler shop and have them weld it... not something you want to do to your own car if you haven't learned on scap first.

2. just replace the tranny... plenty of people on here do part outs.

3. PepBoy, O'riely's, etc... they sell exhaust wrap. Take the part off your going to wrap (exhaust, mani, down pipe)... take the entire roll of wrap and put it in a bucket of water and let it soak. It wont fall apart but it will become slightly more elastic and alow for a tighter wrap. Start at the back and work forward, the reason for this is wind under your car isn't hitting an open layer. Wrap should lay 1/2 over 1/2, and use the metal ties to secure it in place, 2 on the start point and 2 on the end.
Carpet will make you life so much nicer. New Nissan 240SX Molded Carpet Interior Replacement Kit

4. http://zilvia.net/f/s-chassis/395413...-pictures.html

5. When you get a Trany this will be part of it. Replace your Lower harness also it sounds like your car has gremlins.

6. Energy Suspension sells a bushing kit. There is a "how to" floating around but its on the evil nissan forum.

7. find it in a part out thread or buy a new Stainless Steel braided one from ChaseBays, etc...

8. This is really a pain in the ass but its almost easyier to just buy an uncut Engine Harness (Upper and Lower) and Chassis Harness. find it in a part out thread and ask for the sensors. When you get them in, you should clean all of them with Brake Clean!!!

If you dont mind take some pics of the car...
MadScientist is offline   Reply With Quote
Sponsored Links
Old 04-04-2012, 10:59 AM   #2
s14fbs
Zilvia FREAK!
 
s14fbs's Avatar
 
Join Date: Apr 2009
Location: candy mountain
Age: 35
Posts: 1,543
Trader Rating: (11)
s14fbs is an unknown quantity at this point
Feedback Score: 11 reviews
Send a message via AIM to s14fbs
your tps could be off the idle screw could be set way up but dought it
your injector gromets could be leaking causing high idle also
your throttle cable could be getting hung up
you icav could be non working or dirty but that usally causes low idle in my experience
timing could be all crazy
s14fbs is offline   Reply With Quote
Reply

Bookmarks

Tags
1993, 240sx, dual cam, s13



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:16 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net