KA24de into a real TRUCK!!!

[blu808]

quote: The distributor is shaft driven off of the crankshaft instead of the camshaft like on the 240sx KA engine. Also, the intake manifold on the car engine is different. The truck engine has the funky looking TB on top with a filter above it. "

What year frontier did you have? My frontier had the distrib driven off of the cam. and the intake manifold is different with a upwards facing throttle body.
Also the pans i think may be different, but i was thinking of the sr at the time. the sr will clear the cross member.

thanks

[TurboB15sentra]

Originally Posted by blu808

quote: The distributor is shaft driven off of the crankshaft instead of the camshaft like on the 240sx KA engine. Also, the intake manifold on the car engine is different. The truck engine has the funky looking TB on top with a filter above it. "

What year frontier did you have? My frontier had the distrib driven off of the cam. and the intake manifold is different with a upwards facing throttle body.
Also the pans i think may be different, but i was thinking of the sr at the time. the sr will clear the cross member.

thanks

I think the frontier switched over to the newer style KA head and distributor setup in '98. But the truck block still is shorter along with the crank. The oil pans are still different as well.

Travis

[blu808]

well i was mixed up on the whole thing thinking he wanted to do an sr for a second, im sure the ka may be different but the sr would bolt in, same mounts, ect as the sr