Drift entrance techniques/form - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

di-devol · 05-14-2012, 01:51 PM

Thanks so much!
You are good, I have roll center, but have not adjusted bump steer at all. I was running a 235/45 at 45psi in the rear.

The power is the thing, I should be close to 340ish whp lol, this was a gt2871r .86 @ 16psi.. I had to keep it revved up so high just to make boost with the turbo gasket blown. Next event I'll get more footage, should be alot smoother with the power actually there.

Thanks again!

05-14-2012, 01:51 PM	#11
di-devol Zilvia FREAK! Join Date: Jun 2010 Location: Woodinville Age: 43 Posts: 1,412 Trader Rating: (5) Feedback Score: 5 reviews	Thanks so much! You are good, I have roll center, but have not adjusted bump steer at all. I was running a 235/45 at 45psi in the rear. The power is the thing, I should be close to 340ish whp lol, this was a gt2871r .86 @ 16psi.. I had to keep it revved up so high just to make boost with the turbo gasket blown. Next event I'll get more footage, should be alot smoother with the power actually there. Thanks again!