z32 tt rear hubs - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

2muchboost · 05-20-2012, 06:53 PM

Only reason to upgrade to the larger spline count setup (z32 axle [D side] + q45 axle [D side]) is to minimize the chances of snapping an axle which is not common unless you are making some decent power besides the ability to utilize the different gear ratios. For 90% of the people and their projects....you will not need to do this. However, if your planning on building an LS swapped car or a high HP 2jz setup or something like that....then hang onto these because they will def come in handy later.

If I hadnt bought mine a month ago I would have taken these of your hands. If you do decide to sell though...shoot me a pm. I have a few people who would benefit from these.

05-20-2012, 06:53 PM	#12
2muchboost Nissanaholic! Join Date: Apr 2003 Location: Austin, TX Age: 41 Posts: 2,183 Trader Rating: (33) Feedback Score: 33 reviews	Only reason to upgrade to the larger spline count setup (z32 axle [D side] + q45 axle [D side]) is to minimize the chances of snapping an axle which is not common unless you are making some decent power besides the ability to utilize the different gear ratios. For 90% of the people and their projects....you will not need to do this. However, if your planning on building an LS swapped car or a high HP 2jz setup or something like that....then hang onto these because they will def come in handy later. If I hadnt bought mine a month ago I would have taken these of your hands. If you do decide to sell though...shoot me a pm. I have a few people who would benefit from these. Last edited by 2muchboost; 05-21-2012 at 07:20 AM..