tension rod - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

180fan · 05-20-2004, 07:42 PM

lift the front end up, have another jack nearby since you'll probably need it to lift. Have the bolt up at the front at least put through the hole so you'll need to worry bout the rear. once you've done that try using the jack to lift the wheel up or let it drop to where you can match up the two holes for the tension rod. if they're halfway through, try the jack to help them through and maybe give em a lil pursuasion from a rubber mallet.

05-20-2004, 07:42 PM	#1
180fan Leaky Injector Join Date: Apr 2004 Location: San Francisco Posts: 146 Trader Rating: (0) Feedback Score: 0 reviews	lift the front end up, have another jack nearby since you'll probably need it to lift. Have the bolt up at the front at least put through the hole so you'll need to worry bout the rear. once you've done that try using the jack to lift the wheel up or let it drop to where you can match up the two holes for the tension rod. if they're halfway through, try the jack to help them through and maybe give em a lil pursuasion from a rubber mallet.