Hot cam swap help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

DennisC · 06-17-2012, 02:42 PM

I will try to set it at TDC then take a pic of the cam positions.
OK heres how it looks like now. To me it looks like I did it correctly. I just didn't have the pics in the first post set at TDC because I didn't spin the engine back to TDC yet.
Edit:
I just got it running and took it for a drive and it drives awesome. The only problem is that when I came back home, it stalled out when I stopped. It wouldn't start back up. But I got it started after letting it sit for half a hour. But when I revved it a little, it stalled out again and won't start back up again. what could had went wrong? Reset the ecu already btw and I noticed it was idling kinda low at around 500-600 so I just adjusted the iacv a little and I'll try starting again in a bit.

06-17-2012, 02:42 PM	#4
DennisC Zilvia Junkie Join Date: Dec 2010 Location: Elk Grove Posts: 585 Trader Rating: (9) Feedback Score: 9 reviews	I will try to set it at TDC then take a pic of the cam positions. OK heres how it looks like now. To me it looks like I did it correctly. I just didn't have the pics in the first post set at TDC because I didn't spin the engine back to TDC yet. Edit: I just got it running and took it for a drive and it drives awesome. The only problem is that when I came back home, it stalled out when I stopped. It wouldn't start back up. But I got it started after letting it sit for half a hour. But when I revved it a little, it stalled out again and won't start back up again. what could had went wrong? Reset the ecu already btw and I noticed it was idling kinda low at around 500-600 so I just adjusted the iacv a little and I'll try starting again in a bit. __________________ Last edited by DennisC; 09-24-2012 at 04:10 PM..