Who ever rubbed thru a wiring harness cuz your too low?? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Philip · 05-21-2004, 03:41 PM

Depending on how low you are, that won't do it...

I zipped mine up there and after two weeks the same thing happened, just not as bad.

Take the fender off and zip it up on top of the tab closer to the fender and further up.

Also, while you are down there, take a BFH and fold up that tab that hangs down, your tires will thank you!

S14DriftR · 05-21-2004, 07:46 PM

mine were doing that also, i ziptied the wires up and put a few welding rods on the bottom just in case so they would rub instead of the wires, i was rubbing the metal tab also, so i folded it with a 3lb maul.

Junia0607 · 05-21-2004, 10:28 PM

Its a pretty common problem where I'm from. Most people I know usually end up rerouting the lines through the engine bay.

chokudoriS13 · 05-22-2004, 07:30 PM

Mine rubbed through the plastic protector before I realized what was going on

.

05-21-2004, 03:41 PM	#1
Philip Leaky Injector Join Date: Feb 2003 Location: Minne Posts: 55 Trader Rating: (0) Feedback Score: 0 reviews	Depending on how low you are, that won't do it... I zipped mine up there and after two weeks the same thing happened, just not as bad. Take the fender off and zip it up on top of the tab closer to the fender and further up. Also, while you are down there, take a BFH and fold up that tab that hangs down, your tires will thank you! __________________ ---------------------------------- ///D-TOWN\\\ It Ain't No Fun if the Homies Can't Have None

05-21-2004, 07:46 PM	#2
S14DriftR Zilvia Addict Join Date: Feb 2003 Location: Oxnard Age: 41 Posts: 604 Trader Rating: (1) Feedback Score: 1 reviews	mine were doing that also, i ziptied the wires up and put a few welding rods on the bottom just in case so they would rub instead of the wires, i was rubbing the metal tab also, so i folded it with a 3lb maul. __________________

05-22-2004, 07:30 PM	#4
chokudoriS13 Zilvia FREAK! Join Date: Oct 2002 Location: Los Angeles, CA Age: 44 Posts: 1,022 Trader Rating: (0) Feedback Score: 0 reviews	Mine rubbed through the plastic protector before I realized what was going on . __________________ S13/86/Miatas/DR30/MX83/E36 M3/S60R/E30 M3 -gone! Now: Porsche 993/MK7 GTI

05-21-2004, 10:28 PM	#3
Junia0607 Join Date: Dec 2002 Location: Here Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	Its a pretty common problem where I'm from. Most people I know usually end up rerouting the lines through the engine bay.