sr20det bogging and lag problems

[cbcm2435]

Originally Posted by brianbish93

i meant test it but im just going to go buy a new one, and if i had a vacuum leak could i still be running the right vacuum at idle?

testing a relay is actually really easy, there are four prongs on the bottom two are for the magnetic coil, and two are for the switch, when unpluged you should get some resistance between the two for the coil, and to test the resistance for the switch, all you have to do is energize the coil side so the switch closes and test the resistance across the switch (which should be about 0 ohms)

[brianbish93]

Thanks for the input everyone,I'm waiting on tools from a friend , I will get back to you tomorrow when I check the plugs and reading on maf