cheap strut bar

[patsajak]

i found this strut bar
SB-NS13F Megan Racing Strut Bars - Front (Polished) for 89-94 Nissan 240sx at Andy's Auto Sport

and it seems really cheap, is there something wrong with it?

[blueshark123]

the brackets on the end are thin and weak

[Hashiriya415]

If you want looks only, it might be OK. But if you want to strengthen chassis and reduce flexing then look elsewhere.
I would be scared if they would ship you a bar that is 100% aluminum, like it says in the description. You could crush that in your hand. The yield strength of pure aluminium is 7–11 MPa, while aluminum alloys have yield strengths ranging from 200 MPa to 600 MPa.

[KOUKIboy]

Originally Posted by patsajak

i found this strut bar
SB-NS13F Megan Racing Strut Bars - Front (Polished) for 89-94 Nissan 240sx at Andy's Auto Sport

and it seems really cheap, is there something wrong with it?

Its Megan, and looks flimsy as fuck!!!!

[leung]

Originally Posted by Hashiriya415

If you want looks only, it might be OK. But if you want to strengthen chassis and reduce flexing then look elsewhere.
I would be scared if they would ship you a bar that is 100% aluminum, like it says in the description. You could crush that in your hand. The yield strength of pure aluminium is 7–11 MPa, while aluminum alloys have yield strengths ranging from 200 MPa to 600 MPa.

My one piece carbing strut bar is aluminum and def not weak nor flimsy.

[Chaluska]

lol its a strut bar.. it wont be any more rigid than any other bar that connects the two strut towers together.

[Slammed Assassin]

i have a greddy strut bar for sale if you are interested!

[eek]

Its a daym bar. I'd be surprised if you could bend it. Would I rock it? No because I don't like generic knock off parts. For $25 what do you really expect? It won't hurt if you rock it and if it really does bend or break it was only $25 so its easily replaced.

[MrChow]

You get what you paid for with strut bars. Cheap works, more $$ better the strut will work. I've noticed the differences from cheap to the more name brand. I've done both.

[JasianBlazin]

i've read really bad reviews about andysautosport. If you wan't a cheap one just hit up eBay or something.

[BossHogg]

Originally Posted by leung

My one piece carbing strut bar is aluminum and def not weak nor flimsy.

I second that leung.

[Quail]

Look at the difference between this:



And this:



Now consider what the job of the bar is.

[Jonathong]

Originally Posted by Quail

Now consider what the job of the bar is.

here's a cheap one from ebay that looks like that. http://www.ebay.com/itm/1995-1998-NI...4814b3&vxp=mtr

[Quail]

^ That looks subtantially better than the one OP posted.

If the brackets/hardware are up to the job, thats a good purchase. For the price I'm still skeptical!

[Chris28]

One of the only strut tower braces that actually does anything.

[badbob2121]

Stealth Custom Fab

Stealth Fabrication.

Very high quality pieces for a great price

[KiLLeR2001]

Looking at these lame bars makes me appreciate my OEM strut tower bar that much more. <3

[Jonnie Fraz]

Originally Posted by Chris28

One of the only strut tower braces that actually does anything.

Originally Posted by badbob2121

Stealth Custom Fab

Stealth Fabrication.

Very high quality pieces for a great price

Thanks guys!

I will toss my .02 in here. There a few good ones out there...Carbing being one for sure. I believe that the solid design is far superior than the adjustable style. The solid design helps with not only compression ( where the strut towers are pressing toward each other), but the solid design helps where the towers will try to twist on the fore and aft axis. There a couple videos out there that illustrate this...sorry I did not link them. One by Greddy I think and also Ultra Racing.

[Phlip]

+1 for Jonnie Fraz and his bars, I have his rear STB and tension arm brace... The only reason I don't have his front STB is because my daughter came along and told me to stop spending money.

[ixfxi]

Originally Posted by Phlip

+1 for Jonnie Fraz and his bars, I have his rear STB and tension arm brace... The only reason I don't have his front STB is because my daughter came along and told me to stop spending money.

wait... whats this? you actually have a 240sx and modify it?


damn phlip.... i thought you were just a moderator, i had no idea you were also an owner!

[drift213]

Or the 2" thick chromoly strut bar lol

[Hashiriya415]

I just remembered I'm selling a used cusco front and rear bar. Rear is 2 piece triangle set. PM me for pricing

[JasianBlazin]

this thread has been raped by spam bots.

[imbored205]

lol why does this site have so much bots?
two other sites I go on that have way more users never gets this.

[naw_speed]

Fits On:
89-94 Nissan 240SX
About this Manufacturer:
Megan Racing was started in 2001, their top priority has been to provide high quality performance parts at reasonable prices. Generally you can expect to get what you pay for, but in the case of Megan parts, you really do get more than what you'd expect for the price you pay.
About this Product:
The Megan Racing strut bar is made of 100% aluminum with a width of 1.

maybe you should read the info on the part again. especially where it says "Generally you can expect to get what you pay for"... don't think i wouldn't buy Megan cause i have but, don't be lazy save some money and get something nice and functional!...

[ixfxi]

Originally Posted by naw_speed

Megan Racing was started in 2001, their top priority has been to provide high quality performance parts at reasonable prices.

Dr. Evil, several years ago we invested in a small Seattle-based coffee company. Today Starbucks offers premium quality coffee at affordable prices. De-lish!

sounds totally original

[Phlip]

Originally Posted by ixfxi

wait... whats this? you actually have a 240sx and modify it?


damn phlip.... i thought you were just a moderator, i had no idea you were also an owner!

Veeeeeery slowly, Mike.
Grownup things take precedence, so Ava, my wife and the mortgage come first... I DID get the car back from paint in late April though.
I still fully vouch for Jonnie's bars though.

[Nicelyphe]

Here's a good quality "Wide Style" Thick bar.

GTSPEC Nissan 240SX Front Type-D Aluminum Strut Brace - Project Endless Motorsports, LLC