how can you tell which transmission you have in your car??

[zerodameaon]

The transmission itself is pretty much exactly the same from S13 to S14, KA to SR, only the bell housing changes. Check to see if you have a crank angle sensor on top of your transmission bellhousing.
If you have one there it could be bad or just unplugged. If you don't have one and don't have this hole.

If you don't have that hole you will need to go bet a S14 KA bell housing, probably a tall order but not completely unobtainable. Your other option is to drill the holes in the right spot, which the above picture shows.

Also in the future we have this cool feature, its called search, you would have found your answers 10 fold by searching for Crank Angle Sensor. It and almost every issue you will have has already been covered on this forum.

[yaldizzle]

Originally Posted by zerodameaon

The transmission itself is pretty much exactly the same from S13 to S14, KA to SR, only the bell housing changes. Check to see if you have a crank angle sensor on top of your transmission bellhousing.
If you have one there it could be bad or just unplugged. If you don't have one and don't have this hole.

If you don't have that hole you will need to go bet a S14 KA bell housing, probably a tall order but not completely unobtainable. Your other option is to drill the holes in the right spot, which the above picture shows.

Also in the future we have this cool feature, its called search, you would have found your answers 10 fold by searching for Crank Angle Sensor. It and almost every issue you will have has already been covered on this forum.

thanks for the reply. i really appreciate it. i honestly did try searching for 2 days straight trying to find my answers before posting a new thread about it. i dont know if i just dont know how to use zilvia's search feature or what, because everytime i type in crank angle sensor, soooo many threads pop up and i read through a lot of them and they dont have the answers im looking for =/