no clutch please help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

nd240sx3 · 06-11-2004, 06:37 PM

ok i press the clutch pedal and nuthin right to the floor and stays there no presure at all but there is fluid in the resevoir whats the prob someone help please

smellslikecurry · 06-11-2004, 09:36 PM

bleed ur clutch pedal mang

INeedNewTires · 06-12-2004, 10:11 AM

check the bleeder valve on the slave cylinder then check all the lines especially the rubber line cause it could have cracked. Check for leaks, check integrity of reservoir and seals on M/c and S/c. Just check over the whole hydraulic system its not hard, if you gotta replace something then do it! just dive in, get dirty, its the only way anything ever gets fixed.

TheSparo · 06-12-2004, 10:14 AM

bleed your clutch!!! haha almost positive thats u'r problem

DJ_Sunrise · 06-12-2004, 12:44 PM

hmm... u mighta have to adjust ur clutch pedal.. when u press it in, does it pop back out? can you shift through the gears or no? lay down under ur steering wheel and look under ur pedal. see if theres any fluid leaking. look at the metal piece going into the firewall. the end of it pointing towards ur seat should have maybe 1cm of threading. hope this helps

06-11-2004, 06:37 PM	#1
nd240sx3 Zilvia Junkie Join Date: Feb 2003 Location: warminster pa Age: 44 Posts: 390 Trader Rating: (0) Feedback Score: 0 reviews	no clutch please help ok i press the clutch pedal and nuthin right to the floor and stays there no presure at all but there is fluid in the resevoir whats the prob someone help please

06-12-2004, 10:11 AM	#3
INeedNewTires Zilvia FREAK! Join Date: May 2003 Location: Austin, TX Posts: 1,527 Trader Rating: (4) Rides Gallery: INeedNewTires Feedback Score: 4 reviews	check the bleeder valve on the slave cylinder then check all the lines especially the rubber line cause it could have cracked. Check for leaks, check integrity of reservoir and seals on M/c and S/c. Just check over the whole hydraulic system its not hard, if you gotta replace something then do it! just dive in, get dirty, its the only way anything ever gets fixed. __________________

06-12-2004, 10:14 AM	#4
TheSparo Zilvia FREAK! Join Date: Sep 2002 Location: Athens/Chattanooga/ Cookeville/Morristown, TN Age: 39 Posts: 1,141 Trader Rating: (0) Feedback Score: 0 reviews	bleed your clutch!!! haha almost positive thats u'r problem __________________ 89 240 SR powered... ummm i promise its stock

06-11-2004, 09:36 PM	#2
smellslikecurry Post Whore! Join Date: May 2003 Location: bangladesh Age: 38 Posts: 4,590 Trader Rating: (33) Feedback Score: 33 reviews	bleed ur clutch pedal mang

06-12-2004, 12:44 PM	#5
DJ_Sunrise Zilvia FREAK! Join Date: Feb 2004 Location: NJ Age: 38 Posts: 1,134 Trader Rating: (1) Feedback Score: 1 reviews	hmm... u mighta have to adjust ur clutch pedal.. when u press it in, does it pop back out? can you shift through the gears or no? lay down under ur steering wheel and look under ur pedal. see if theres any fluid leaking. look at the metal piece going into the firewall. the end of it pointing towards ur seat should have maybe 1cm of threading. hope this helps