S14 fuel pump will not prime

[silviaNC]

Originally Posted by jr_ss

On the M63 plug, it is pin #11, it should be a black/pink wire that goes from your ECU to the "dash wiring" or F4 plug and the on to the relay. Pin #10 should be a black/yellow wire that comes from your ECU to the M63 and then on to the FP relay. Verify you have both wires on the M63 and F4. I don't have an FSM in front of me but I will this evening and I can verify the signal wire from the ECU to relay and get back to you.

I'm assuming when you say pin #104 you are referring to the one on the ECU plug?

Thanks Ill look at the plugs in the morning and get back at you. Yeah #104 on the ecu plug wich is the pump relay wire. To clarify this is a s14 with s13 sr swap. Pm me your # i can txt u as well