Emanage Ulimate SR20DET HELP!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

OzzYNMotioN · 01-08-2013, 04:56 PM

alright, so i purchased this greddy emanage ultimate from my friend which he pulled out of his is300 to go to haltech, so yes the emu was working and properly functioning when i bought it. sense his car was a Lexus and my engine a Nissan, i went and purchased the "plug'N'play" harness from trust aka(greddy). i followed the instructions and installed ever thing correctly and plugged the batter before installation.So this is where the problem starts; i set the emu for my sr20det, checked if the emu was reading input signals and such and all checked out, When i when i went to start the car it just continuously turned over but but wouldn't start. i checked for spark and didnt have any, i checked the igniter and it turned out to be shorted out, now i dont know how that happened. so i went and purchased a new igniter re installed the emanage and the same problem occurred

. I have continuously tried contacting greddy for further information on there unit, i havent had any luck. If any of you have any information or a solution to my problem please share with me!

slider2828 · 01-08-2013, 05:34 PM

Sounds like the pinouts are correct.. I have own an emanage regular version... Are you sure your jumpers are correct to the correct SR20DET? Meaning the emanage is replacing the correct version of the ecu in your car?

OzzYNMotioN · 01-08-2013, 05:55 PM

Quote:

Originally Posted by slider2828

Sounds like the pinouts are correct.. I have own an emanage regular version... Are you sure your jumpers are correct to the correct SR20DET? Meaning the emanage is replacing the correct version of the ecu in your car?

yeah i believe they are, they had the jumper set up in the manuel that i set up before installing, could they have been bumped some how while i re installed them?

silver350z05rb · 01-09-2013, 01:09 AM

I bought a brand new e manage once and brand new harness, my 350z wouldn't start.....i drove to greddy and they looked at my e manage and they said i had set it up correctly, so they decided to look at my harness (plug n play) 5mns later, they told me they sent me a.harness that was pinned wrong, 2 wires were crossed, they fixed it in 1mn, and the car started, same symptoms as you. Oh by the way i just drove there, they didn't answer my calls or emails, but i don't think you live in California......also make sure you're not using his old map

OzzYNMotioN · 01-09-2013, 06:32 AM

Quote:

Originally Posted by silver350z05rb

I bought a brand new e manage once and brand new harness, my 350z wouldn't start.....i drove to greddy and they looked at my e manage and they said i had set it up correctly, so they decided to look at my harness (plug n play) 5mns later, they told me they sent me a.harness that was pinned wrong, 2 wires were crossed, they fixed it in 1mn, and the car started, same symptoms as you. Oh by the way i just drove there, they didn't answer my calls or emails, but i don't think you live in California......also make sure you're not using his old map

so it shorted out the igniter like mine? so what do you think should do at this point? does greddy have a pin out diagram on the plug n play harness?

jr_ss · 01-09-2013, 07:01 AM

You should probably just throw it in the trash and have a Nistune installed. Better control, OEM reliability and it doesn't fry ignitors.

OzzYNMotioN · 01-09-2013, 07:07 AM

Quote:

Originally Posted by jr_ss

You should probably just throw it in the trash and have a Nistune installed. Better control, OEM reliability and it doesn't fry ignitors.

as much as i would love doing this i dont have the cash flow to just throw away stuff and replace it.

jr_ss · 01-09-2013, 07:10 AM

Quote:

Originally Posted by OzzYNMotioN

as much as i would love doing this i dont have the cash flow to just throw away stuff and replace it.

I understand that, nor do I. However, my point was the emanage is garbage and you should sell it and purchase a better product. I didn't necessarily mean throw it away...

OzzYNMotioN · 01-09-2013, 09:08 AM

Quote:

Originally Posted by jr_ss

I understand that, nor do I. However, my point was the emanage is garbage and you should sell it and purchase a better product. I didn't necessarily mean throw it away...

yeah understand, but im pretty sure no one will buy it off of me. but i just want to figure out this problem because its annoying as hell.

s14-rb20det · 01-09-2013, 06:26 PM

check page 6 and 27. http://www.google.ca/url?q=http://ww...XMViN0jwbxaRCQ

OzzYNMotioN · 01-09-2013, 07:31 PM

they sent me the N-6 -______- which is for the r33 now im just waiting on a reply to get the correct one

01-08-2013, 04:56 PM	#1
OzzYNMotioN Zilvia Member Join Date: Apr 2011 Location: naples, Fl Age: 32 Posts: 196 Trader Rating: (1) Feedback Score: 1 reviews	Emanage Ulimate SR20DET HELP!! alright, so i purchased this greddy emanage ultimate from my friend which he pulled out of his is300 to go to haltech, so yes the emu was working and properly functioning when i bought it. sense his car was a Lexus and my engine a Nissan, i went and purchased the "plug'N'play" harness from trust aka(greddy). i followed the instructions and installed ever thing correctly and plugged the batter before installation.So this is where the problem starts; i set the emu for my sr20det, checked if the emu was reading input signals and such and all checked out, When i when i went to start the car it just continuously turned over but but wouldn't start. i checked for spark and didnt have any, i checked the igniter and it turned out to be shorted out, now i dont know how that happened. so i went and purchased a new igniter re installed the emanage and the same problem occurred . I have continuously tried contacting greddy for further information on there unit, i havent had any luck. If any of you have any information or a solution to my problem please share with me! __________________ buildhttp://zilvia.net/f/chat/438695-sr36...o-bmw-e36.html

01-08-2013, 05:34 PM	#2
slider2828 Post Whore! Join Date: Oct 2004 Location: San Francisco, CA Posts: 6,040 Trader Rating: (13) Feedback Score: 13 reviews	Sounds like the pinouts are correct.. I have own an emanage regular version... Are you sure your jumpers are correct to the correct SR20DET? Meaning the emanage is replacing the correct version of the ecu in your car? __________________ Turn and Burn!

01-09-2013, 07:01 AM	#6
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,415 Trader Rating: (35) Feedback Score: 35 reviews	You should probably just throw it in the trash and have a Nistune installed. Better control, OEM reliability and it doesn't fry ignitors. __________________ My SR20VET Does your VTC gear rattle in your S14/15 SR? PM me.

01-09-2013, 07:31 PM	#11
OzzYNMotioN Zilvia Member Join Date: Apr 2011 Location: naples, Fl Age: 32 Posts: 196 Trader Rating: (1) Feedback Score: 1 reviews	they sent me the N-6 -______- which is for the r33 now im just waiting on a reply to get the correct one __________________ buildhttp://zilvia.net/f/chat/438695-sr36...o-bmw-e36.html

01-09-2013, 01:09 AM	#4
silver350z05rb Zilvia Junkie Join Date: Apr 2008 Location: California Age: 38 Posts: 432 Trader Rating: (9) Feedback Score: 9 reviews	I bought a brand new e manage once and brand new harness, my 350z wouldn't start.....i drove to greddy and they looked at my e manage and they said i had set it up correctly, so they decided to look at my harness (plug n play) 5mns later, they told me they sent me a.harness that was pinned wrong, 2 wires were crossed, they fixed it in 1mn, and the car started, same symptoms as you. Oh by the way i just drove there, they didn't answer my calls or emails, but i don't think you live in California......also make sure you're not using his old map

01-09-2013, 06:26 PM	#10
s14-rb20det Leaky Injector Join Date: Jul 2011 Location: Brazil Age: 46 Posts: 62 Trader Rating: (0) Feedback Score: 0 reviews	check page 6 and 27. http://www.google.ca/url?q=http://ww...XMViN0jwbxaRCQ