Wheel Fitment Question Thread

[cchondro]

Originally Posted by JN1AS4

I have a quick/important question. First off, I drive a stock body s13 coupe with megan coils/RUCA . And Im looking to purchase a set of Varrstoen 2.2.0(TE37replicas) 17x9.5 et22 w/ 245/40/17squared setup. I want to know if I can make these fit with a fender roll/ minor pull. And would love to do so, without having to run tons of negative camber. -2.5 front and -2 rear is about ideal give or take. I've done a lot of numbers crunching/research and it seems very possible. But i'll like to know for sure. WILL THIS SETUP WORK???

With the camber you have posted yes it will work but a minor pull is out of the question.
your going to need a decent pull for the real and most likely for the front to

[JN1AS4]

Originally Posted by cchondro

With the camber you have posted yes it will work but a minor pull is out of the question.
your going to need a decent pull for the real and most likely for the front to

So if I ran a 17x9.5 +30 w/5mm spacer up front. And 255/40 sq. setup instead of the 17x9.5 +22 245/40 will that make things easier or not since I'll be squeezing even more tire under it now?