Apexi Power FC question???

[MrChow]

Originally Posted by oni jake

LOL?

You can reset your Power F/C to factory settings in the menu on the commander. Its called "initialize" or something similar. (I'm not near my car to tell you the exact label)

When every motor upgrade is back to being at least somewhat close to stock settings, a reset should be fine. I would just double check the size differences between S14 and S15 injectors. If they are different, do some math and modify the injector duty cycles to suit your needs. If modified, change your MAF settings as well.

Stock Power F/C tune is very reliable and safe to drive around. No need to pay for a re-tune if your hurting for cash.

I wouldn't initialize/factory reset the FC. What Steve said was basically is what needed. TBH sell the FC find factory ECU.

[inopsey]

Originally Posted by MrChow

I wouldn't initialize/factory reset the FC. What Steve said was basically is what needed. TBH sell the FC find factory ECU.

actually all that is needed is to adjust for the different injectors...............

[smartoss]

Originally Posted by inopsey

actually all that is needed is to adjust for the different injectors...............

Read over this, it will give you some insight how to adjust your power fc.

and how to adjust for your larger injectors

http://paulr33.com/powerfc-faq/powerfc-faq.htm

[MrChow]

Originally Posted by inopsey

actually all that is needed is to adjust for the different injectors...............

True if it was just injectors. He changed cams too.

Guys he's gotten all the info he needs.