engine/engine bay photos - Page 86 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

1quk240 · 05-01-2013, 08:55 PM

My old set-up

Uploaded with ImageShack.us

zombiewolf513 · 05-01-2013, 11:05 PM

mestizo · 05-01-2013, 11:37 PM

ray_dizzle33 · 05-02-2013, 12:14 AM

rbs14kouki · 05-02-2013, 04:35 AM

Almost there !!!

Wathing for Couple more parts and its done !

zombiewolf513 · 05-02-2013, 02:06 PM

one more.

greenwood · 05-02-2013, 02:51 PM

so nice then you run that surge tank cmon bro

my old setup:

zombiewolf513 · 05-02-2013, 03:18 PM

Quote:

Originally Posted by greenwood

so nice then you run that surge tank cmon bro

I usually run without one, that's just so if something happens it doesn't puke on the dyno

greenwood · 05-02-2013, 03:58 PM

I dont understand why you wouldn't use one. good luck with the dyno I see that it is at national speed

zombiewolf513 · 05-02-2013, 04:37 PM

Thanks, I just got an update from national speed. The engine is well built, and at WOT with (what im told) the extremely conservative timing, RPM limit, and AFRs for the break-in tune it still pulled 350whp/300lbft at 17 lbs. They'll post a video on facebook soon, so I'll repost it here when I get it.

zombiewolf513 · 05-02-2013, 08:07 PM

Michael's SR20DET Powered 240SX Pulling | Facebook

EsChassisLove · 05-02-2013, 09:22 PM

Just finished the new FMIC kit and decided to go topmount GRX3076r .64. Going to have the same vibrant clamps and custom piping.

Hoffman5982 · 05-02-2013, 10:25 PM

Quote:

Originally Posted by zombiewolf513

Michael's SR20DET Powered 240SX Pulling | Facebook

Dude,you have a build thread for this. Stop posting every single picture and video you take. Your shit looks great, but we don't need to see it 4 times in 1 day.

nevertheless · 05-02-2013, 10:58 PM

Didn't know where else to post this, but here is the before and final flow numbers of my Sr20. Concentrated mostly on the exhaust side since it is a turbo build. Nice gains with stock valve sizes. Smithberg Racing Ftw!

240sxsrm · 05-02-2013, 11:10 PM

Quote:

Originally Posted by mr_240sx

damn dude that is nice!

s14fbs · 05-05-2013, 05:35 PM

sr im waiting to put in my type x car

waiting on my turbo manifold to get back from being ceramic coating
and tomei arms kit and coil pack cover

PoorMans180SX · 05-05-2013, 06:10 PM

Wire tuck time.

CaptainVlad · 05-05-2013, 06:19 PM

Ended up going with a VG35? I remember you posting over on NRR and on here about doing a 4G63 swap, what ever happened to that?

Also, my friend talked me into doing an all motor VG35 build for the other car. Mind if I message you to ask you some quick questions?

BlackZenkiS14 · 05-05-2013, 06:26 PM

Need to clean it up and get a better picture...but whatever, you get the idea.

Amelia617 · 05-05-2013, 06:52 PM

Hope he doesn't mind, but all engine threads should include Russ' old bay

PoorMans180SX · 05-05-2013, 06:53 PM

Quote:

Originally Posted by CaptainVlad

Ended up going with a VG35? I remember you posting over on NRR and on here about doing a 4G63 swap, what ever happened to that?

Also, my friend talked me into doing an all motor VG35 build for the other car. Mind if I message you to ask you some quick questions?

VQ35 but yeah, check out my build thread and you'll see why. Message away!

Eazy_tom · 05-05-2013, 07:11 PM

Quote:

Originally Posted by EsChassisLove

Just finished the new FMIC kit and decided to go topmount GRX3076r .64. Going to have the same vibrant clamps and custom piping.

Looks good! Im friends with Jose a kaizen, I saw your being worked on.

EsChassisLove · 05-05-2013, 07:36 PM

Quote:

Originally Posted by Eazy_tom

Looks good! Im friends with Jose a kaizen, I saw your being worked on.

Thanks! Jose is a great dude. He's really tedious with his work. Does everything right the first time and didn't let me cut a single corner. Going to have years of 500+hp fun with this engine thanks to him.

Aurimas · 05-06-2013, 01:36 AM

My daily. Yeah, dirty...

Perfect Balance · 05-06-2013, 09:00 PM

Currently being assembled

Polishs13sr · 05-07-2013, 11:31 PM

Almost done with my sr swap. Just a few more wires to tuck and things I needed to clean up. Homemade, unprofessionally painted, flame away!

Spark · 05-09-2013, 02:38 PM

my old setup

Johannes · 05-10-2013, 01:22 AM

Before picture was before the engine starting to have slight rod knock.. before things started to get nasty, I pulled it out, got a new crank, fitted correct OEM size bearings, honed, re-ringed, basically rebuilt the whole bottom end.. and after picture was when I decided to change it up a bit..

Before;

After;

Mikester · 05-13-2013, 10:01 AM

Just about ready... couple things left to do:

jr_ss · 05-13-2013, 11:44 AM

Need better lighting Mike!

05-01-2013, 11:37 PM	#2553
mestizo Zilvia Junkie Join Date: Nov 2006 Location: Sacramento California Posts: 360 Trader Rating: (8) Feedback Score: 8 reviews	__________________ 92 S13 Coupe Track Car

05-02-2013, 12:14 AM	#2554
ray_dizzle33 Zilvia Member Join Date: Dec 2011 Location: perris Posts: 252 Trader Rating: (4) Feedback Score: 4 reviews	__________________ RIP Inland180

05-02-2013, 04:35 AM	#2555
rbs14kouki Zilvia Addict Join Date: Oct 2007 Location: Montreal , Canada Age: 38 Posts: 817 Trader Rating: (1) Feedback Score: 1 reviews	Almost there !!! Wathing for Couple more parts and its done ! __________________ AV FABRICATION Built thread sr20vet s14 http://zilvia.net/f/showthread.php?t=535574

05-02-2013, 09:22 PM	#2562
EsChassisLove Nissanaholic! Join Date: Jan 2011 Location: San Diego Age: 36 Posts: 2,090 Trader Rating: (26) Feedback Score: 26 reviews	Just finished the new FMIC kit and decided to go topmount GRX3076r .64. Going to have the same vibrant clamps and custom piping. __________________ IG/TikTok-ThatS14_Z06guy

05-02-2013, 10:58 PM	#2564
nevertheless Zilvia Junkie Join Date: Jan 2009 Location: omaha, ne Age: 34 Posts: 502 Trader Rating: (5) Feedback Score: 5 reviews	Didn't know where else to post this, but here is the before and final flow numbers of my Sr20. Concentrated mostly on the exhaust side since it is a turbo build. Nice gains with stock valve sizes. Smithberg Racing Ftw! __________________ Jessefuckinwood Street Prowl

05-01-2013, 08:55 PM	#2551
1quk240 Banned from the Marketplace Join Date: Mar 2007 Location: Planet Earth Posts: 768 Trader Rating: (21) Feedback Score: 21 reviews	My old set-up Uploaded with ImageShack.us

05-01-2013, 11:05 PM	#2552
zombiewolf513 BANNED Join Date: Mar 2011 Location: AZ Age: 37 Posts: 1,682 Trader Rating: (6) Rides Gallery: zombiewolf513 Feedback Score: 6 reviews

05-02-2013, 02:06 PM	#2556
zombiewolf513 BANNED Join Date: Mar 2011 Location: AZ Age: 37 Posts: 1,682 Trader Rating: (6) Rides Gallery: zombiewolf513 Feedback Score: 6 reviews	one more.

05-02-2013, 02:51 PM	#2557
greenwood Zilvia Addict Join Date: May 2011 Location: nc Posts: 620 Trader Rating: (5) Feedback Score: 5 reviews	so nice then you run that surge tank cmon bro my old setup:

05-02-2013, 03:58 PM	#2559
greenwood Zilvia Addict Join Date: May 2011 Location: nc Posts: 620 Trader Rating: (5) Feedback Score: 5 reviews	I dont understand why you wouldn't use one. good luck with the dyno I see that it is at national speed

05-02-2013, 04:37 PM	#2560
zombiewolf513 BANNED Join Date: Mar 2011 Location: AZ Age: 37 Posts: 1,682 Trader Rating: (6) Rides Gallery: zombiewolf513 Feedback Score: 6 reviews	Thanks, I just got an update from national speed. The engine is well built, and at WOT with (what im told) the extremely conservative timing, RPM limit, and AFRs for the break-in tune it still pulled 350whp/300lbft at 17 lbs. They'll post a video on facebook soon, so I'll repost it here when I get it.

05-02-2013, 08:07 PM	#2561
zombiewolf513 BANNED Join Date: Mar 2011 Location: AZ Age: 37 Posts: 1,682 Trader Rating: (6) Rides Gallery: zombiewolf513 Feedback Score: 6 reviews	Michael's SR20DET Powered 240SX Pulling \| Facebook

05-05-2013, 05:35 PM	#2566
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 35 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	sr im waiting to put in my type x car waiting on my turbo manifold to get back from being ceramic coating and tomei arms kit and coil pack cover __________________ http://strictlycoolstuff.tumblr.com/

05-05-2013, 06:10 PM	#2567
PoorMans180SX Zilvia.net Advertiser Join Date: Nov 2005 Location: Michigan Age: 37 Posts: 5,616 Trader Rating: (16) Rides Gallery: PoorMans180SX Feedback Score: 16 reviews	Wire tuck time. __________________ Build: http://zilvia.net/f/showthread.php?t=643065 Friends don't let friends buy knock-offs.

05-05-2013, 06:19 PM	#2568
CaptainVlad Zilvia Junkie Join Date: Oct 2007 Location: Chicago, Illinois Age: 34 Posts: 331 Trader Rating: (4) Feedback Score: 4 reviews	Ended up going with a VG35? I remember you posting over on NRR and on here about doing a 4G63 swap, what ever happened to that? Also, my friend talked me into doing an all motor VG35 build for the other car. Mind if I message you to ask you some quick questions?

05-05-2013, 06:26 PM	#2569
BlackZenkiS14 Nissanaholic! Join Date: Nov 2003 Location: "St. Chuck", MO Age: 39 Posts: 2,095 Trader Rating: (15) Feedback Score: 15 reviews	Need to clean it up and get a better picture...but whatever, you get the idea. __________________ -Kyle

05-05-2013, 06:52 PM	#2570
Amelia617 Join Date: May 2013 Location: usa Age: 35 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	Hope he doesn't mind, but all engine threads should include Russ' old bay

05-06-2013, 01:36 AM	#2574
Aurimas Leaky Injector Join Date: Jun 2012 Location: Las Vegas Age: 31 Posts: 55 Trader Rating: (0) Feedback Score: 0 reviews	My daily. Yeah, dirty...

05-06-2013, 09:00 PM	#2575
Perfect Balance Zilvia Junkie Join Date: Nov 2006 Location: Virginia Age: 34 Posts: 397 Trader Rating: (1) Feedback Score: 1 reviews	Currently being assembled

05-07-2013, 11:31 PM	#2576
Polishs13sr Join Date: Nov 2012 Location: Dallas, Texas Age: 35 Posts: 6 Trader Rating: (0) Feedback Score: 0 reviews	Almost done with my sr swap. Just a few more wires to tuck and things I needed to clean up. Homemade, unprofessionally painted, flame away!

05-09-2013, 02:38 PM	#2577
Spark Join Date: Mar 2008 Location: Russia Age: 41 Posts: 23 Trader Rating: (0) Feedback Score: 0 reviews	my old setup __________________ RPS13 TypeX Zenki=>Kouki

05-10-2013, 01:22 AM	#2578
Johannes Zilvia Member Join Date: Feb 2009 Location: Washington Age: 31 Posts: 255 Trader Rating: (7) Feedback Score: 7 reviews	Before picture was before the engine starting to have slight rod knock.. before things started to get nasty, I pulled it out, got a new crank, fitted correct OEM size bearings, honed, re-ringed, basically rebuilt the whole bottom end.. and after picture was when I decided to change it up a bit.. Before; After;

05-13-2013, 10:01 AM	#2579
Mikester Nissanaholic! Join Date: Jun 2007 Location: Kathleen, GA Age: 53 Posts: 1,956 Trader Rating: (0) Feedback Score: 0 reviews	Just about ready... couple things left to do: __________________

05-13-2013, 11:44 AM	#2580
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,415 Trader Rating: (35) Feedback Score: 35 reviews	Need better lighting Mike! __________________ My SR20VET Does your VTC gear rattle in your S14/15 SR? PM me.