GT2871 USERS. SR motor

[ultimateirving]

Originally Posted by SR20HAYES

Perhaps, but the extra 1" may cause it to rub a little much..if no other solutions seem evident then I may try that.

Would be nice if i had a 3" elbow to mock up, but no local shops have one other then the really long ones which I would have to cut to fit, but for the $60 they are charging I'd rather wait and order the right elbow.


:EDIT: Ok, after talking to a few more people threw FB it appears you were right. wrapping it and letting it rest on the intake is the best solution. Thanks for the help.

Also. Make sure ur 90* is poinTed towards the engine hard to tell from the pic. . It will give you more slack to play with. |.||,

[SR20HAYES]

Originally Posted by ultimateirving

Also. Make sure ur 90* is poinTed towards the engine hard to tell from the pic. . It will give you more slack to play with. |.||,

Not sure what you mean. The 90 on the coolant return is facing down. The engine mount is close so I can't really do it another way. Might be able to face it towards the front of the car but it would be running along the block.

[ultimateirving]

That's what I meant. Try and cockeye it pointed forward. Any extra slack should be enough to get a 3" coupler on and let it ride on top.