H&R spacers for S14 4 lug - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Tubed4evr · 08-06-2004, 10:30 AM

Don't be so quick to say S13 and S14 studs are the same. I had a lengthy conversation with an application engineer at H&R a while back when I ran into problems with my studs. The S13 uses a knurl diameter (part that presses into the hub) that is the same for all wheels. The S14 studs have a different diameter knurl for front and rear. So that right there tells me they are not interchangable. I would investigate further before you drop $130 on something you can't use.

Ryan

P.S. If it was my money I would go with the Nismo studs (I actually ended up using the Nismo's when my H&R studs didn't fit properly.) and get the spacers from Wheel Adapters. They are very reputable and offer competitive pricing.

08-06-2004, 10:30 AM	#4
Tubed4evr Zilvia Member Join Date: Aug 2002 Location: Virginia Tech / Chesapeake, VA Posts: 223 Trader Rating: (0) Feedback Score: 0 reviews	Don't be so quick to say S13 and S14 studs are the same. I had a lengthy conversation with an application engineer at H&R a while back when I ran into problems with my studs. The S13 uses a knurl diameter (part that presses into the hub) that is the same for all wheels. The S14 studs have a different diameter knurl for front and rear. So that right there tells me they are not interchangable. I would investigate further before you drop $130 on something you can't use. Ryan P.S. If it was my money I would go with the Nismo studs (I actually ended up using the Nismo's when my H&R studs didn't fit properly.) and get the spacers from Wheel Adapters. They are very reputable and offer competitive pricing. Last edited by Tubed4evr; 08-06-2004 at 10:58 AM..