WTB: 240sx Hatch - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Skawski · 05-27-2013, 05:05 PM

I've been thinking about selling my 92 hatch.

The good

Everything your interested in minus AC. 95 KA24DE(unknown mileage) had it in car for roughly 20K miles(2 road trips 5K+ miles w/ no issues), Aluminum radiator w. aluminum shroud and e fans 5-lug, Coils(function and form height/spring rate seperate), megan tension rods, tein inners/outers. Solid link rear suspension(Isis) w/ subframe risers(not collars). 300zx diff. 5 speed. Just replaced the water pump. power steering works. Brand new khumo ecsta tires(5k miles on em paid 350 installed) S14 rims on it now freshly painted. Have a set of 300zx rims for it too.

The bad

Flat black paint was done about 5 years ago so it needs to be painted again
Won't pass emissions in CA as it sits.(no cat, intake, valve cover breather, no egr)
2 piece drive shaft carrier bearing is going bad driveshaft has play in tunnel under heavy load but random not always. After i changed my intake I had the PCV breather going to the intake and that sucked a lot of oil into the plenum, been blowing blue smoke from a dead stop lately since it pooled up in there(just figured this out still working it out). Compression came up 155 across the board(minimal)

Just throwing it out there man. (847) 452-6281. Price min would be 5K(cali prices are high, in IL I'd ask 3,500.....)

05-27-2013, 05:05 PM	#5
Skawski Leaky Injector Join Date: Sep 2010 Location: Elgin, IL Age: 35 Posts: 81 Trader Rating: (2) Feedback Score: 2 reviews	I've been thinking about selling my 92 hatch. The good Everything your interested in minus AC. 95 KA24DE(unknown mileage) had it in car for roughly 20K miles(2 road trips 5K+ miles w/ no issues), Aluminum radiator w. aluminum shroud and e fans 5-lug, Coils(function and form height/spring rate seperate), megan tension rods, tein inners/outers. Solid link rear suspension(Isis) w/ subframe risers(not collars). 300zx diff. 5 speed. Just replaced the water pump. power steering works. Brand new khumo ecsta tires(5k miles on em paid 350 installed) S14 rims on it now freshly painted. Have a set of 300zx rims for it too. The bad Flat black paint was done about 5 years ago so it needs to be painted again Won't pass emissions in CA as it sits.(no cat, intake, valve cover breather, no egr) 2 piece drive shaft carrier bearing is going bad driveshaft has play in tunnel under heavy load but random not always. After i changed my intake I had the PCV breather going to the intake and that sucked a lot of oil into the plenum, been blowing blue smoke from a dead stop lately since it pooled up in there(just figured this out still working it out). Compression came up 155 across the board(minimal) Just throwing it out there man. (847) 452-6281. Price min would be 5K(cali prices are high, in IL I'd ask 3,500.....)