AZ RB26 S14 240sx PART OUT! Lots of good parts! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

BrownDogg · 05-14-2013, 11:33 PM

RB26 S14 240sx PART OUT! Lots of good parts!

The time has finally come to part out my S14 Nissan 240sx. Let me know what you would like! My contact information is below

I can bundle parts together if you are interested in multiple parts. Make an offer on what you would like.

Injector Dynamics 1000cc injectors: SOLD

Splitfire RB coilpacks: SOLD

Haltech Platinum Pro 2000 standalone engine management system: $2000
comes with MAP sensor, flying lead harness good for literally any car, includes Haltech wideband O2

Power FC D-Jetro for an RB26 with Map Sensor: SOLD

RB26 OEM Complete engine harness: SOLD

Competition Stage 5 RB Clutch: SOLD

McKinney RB Install kit: SOLD

S14 RB driveshaft. Brand new: SOLD

RB25 5 Speed Transmission: SOLD

RB26 Motorset: SOLD
includes, ARP head studs, greddy timing belt, CP pistons, RB25 oil pan, new head gasket and entire gasket rebuild kit.
polished valve covers, coil pack cover, and GTR engine plate, etc

Stance GR+ Pro S14 coilovers and Z32 rear aluminum uprights: SOLD

K sport rear toe arms: $150

Powertrick Rear Upper Control Arms: $200

Nismo front lower control arms: $100
Plus stock

Turbo smart e-Boost Street electronic Boost controller: $300

OEM RB Coil Packs: $150

RB Cam Angle Sensor : $50

RB26 Twin Scroll tubular T4 divided housing manifold: SOLD

3" v band rb downpipe: SOLD

4" intercooler from Intense power with custom 3" intercooler piping: $400

Precision 6262 T4 divided housing, v band turbo: SOLD

Turbo Smart Hyper Gate 45mm wastegate: SOLD

Turbo Smart Race Port Blow Off valve: $300

Isis short shifter: SOLD

Top Feed Fuel Rail: SOLD

RB pulley kit: SOLD

Koyo ka24 Radiator: SOLD

Electric Fans: SOLD

Varrstoen ES2 wheels: $1500
18x9.5 et 0 and 18x10.5 et 0
Federal RSR 255/35/18 fronts
Federal RSR 265/35/18 rears
Wheels and tires have been driven about 5 miles total. basically new

Sparco Evo Racing Seats, two of them: $1000
comes with bride rails, G Force Racing 5 Point harnesses

I have a royal ton of AN fittings as well. -10, -8, -6, push lock and hose end fittings. I dont have a need for any of them.

Aeromotive Fuel Pressure Regular with marshal gauge: SOLD

Suspicious Garage stainless braided Power Steering lines: $160

Suspicious Garage steel braided brake line kit: $180

Suspicious Garage steel braided clutch line: $50

Brake Master Cylinder with brake lines on opposite side: SOLD

12 Row Oil Cooler: $60
-10 fittings on it

12 Row Power Steering cooler: $60
-10 fittings on it

Aluminum power steering reservoir with male AN fittings on it: $60
-6 feed and -10 drain

2qt Accusump with brackets, ball valve for on/off, and 1 way check valve: $250

Rotora Big Brake Kit: $1500

Z32 Rear Brakes, rotors + calipers: SOLD

Future Fab “Dangle” front knuckles for wide angle: SOLD

5 lug setup: $300 + your stock

S14 titanium 3” exhaust: $250

16 Gallon Fuel Cell: $250

XS 80 gph fuel pump with aeromotive pre and after filters: $200

Ksport hydraulic handbrake setup, fittings, lines: SOLD

Nissan S14 240sx Shell: $5000
Caged, tubed, tubbed, solid subframe bushings, rear firewall, etc

Carbon Fiber Wing: $800

Feel free to call or text me: (949) 922-7937 Text is preferred!!!

BrownDogg · 05-20-2013, 06:42 PM

Turbo, Manifold, wastegate, and downpipe are SOLD!

BrownDogg · 05-21-2013, 12:07 AM

BUMP! Added pictures and lots of parts

dunkell · 05-21-2013, 12:26 AM

Specs/size/pics of the ic.

Ic core brand?

Sent from my GT-I9305

BrownDogg · 05-21-2013, 12:29 AM

Quote:

Originally Posted by dunkell

Specs/size/pics of the ic.

Ic core brand?

Sent from my GT-I9305

Brand: Icevex
High flow rate : 1200 CFM (with a pressure drop of 2.8 psi)
Pressure drop : 0.73 psi at 600 CFM
Pressure drop : 1.65 psi at 910 CFM
Inlet and outlet : 3 inch (76 mm)
Operational pressure : 0 to 55 psig (0 to 3.7 bar)
Peak pressure : 74 psig (5 bar)
Overall size

Length : 31 inches (78 cm)
Height : 12 inches (30 cm)
Width : 4 inches (10cm)
Core size

Length : 24 inches (60 cm)
Height : 12 inches (30 cm)
Width : 4 inches (10 cm)

Aquinones · 05-27-2013, 08:31 AM

im interested in the ID injectors. where are you located?

silviaNC · 05-28-2013, 03:26 PM

Pmed you. Interested in a few partds txt 9196283544

BrownDogg · 06-03-2013, 06:46 PM

Updated with a bunch of sold parts!

kruked · 06-03-2013, 08:01 PM

Inner tie rods?

silvertable58 · 06-03-2013, 11:43 PM

pm.ed about brake master and lines

BrownDogg · 06-17-2013, 07:22 PM

Updated with recent sold parts:
coilovers
master cylinder

Quote:

Originally Posted by kruked

Inner tie rods?

they are stock

TriniGT · 06-17-2013, 07:37 PM

Still have AN fittings, PM what you have and what price for them all?

Nimso · 07-26-2013, 12:49 PM

What kind of exhaust is it?

05-14-2013, 11:33 PM	#1
BrownDogg Leaky Injector Join Date: May 2008 Location: Tempe, AZ Age: 35 Posts: 132 Trader Rating: (1) Feedback Score: 1 reviews	RB26 S14 240sx PART OUT! Lots of good parts! RB26 S14 240sx PART OUT! Lots of good parts! The time has finally come to part out my S14 Nissan 240sx. Let me know what you would like! My contact information is below I can bundle parts together if you are interested in multiple parts. Make an offer on what you would like. Injector Dynamics 1000cc injectors: SOLD Splitfire RB coilpacks: SOLD Haltech Platinum Pro 2000 standalone engine management system: $2000 comes with MAP sensor, flying lead harness good for literally any car, includes Haltech wideband O2 Power FC D-Jetro for an RB26 with Map Sensor: SOLD RB26 OEM Complete engine harness: SOLD Competition Stage 5 RB Clutch: SOLD McKinney RB Install kit: SOLD S14 RB driveshaft. Brand new: SOLD RB25 5 Speed Transmission: SOLD RB26 Motorset: SOLD includes, ARP head studs, greddy timing belt, CP pistons, RB25 oil pan, new head gasket and entire gasket rebuild kit. polished valve covers, coil pack cover, and GTR engine plate, etc Stance GR+ Pro S14 coilovers and Z32 rear aluminum uprights: SOLD K sport rear toe arms: $150 Powertrick Rear Upper Control Arms: $200 Nismo front lower control arms: $100 Plus stock Turbo smart e-Boost Street electronic Boost controller: $300 OEM RB Coil Packs: $150 RB Cam Angle Sensor : $50 RB26 Twin Scroll tubular T4 divided housing manifold: SOLD 3" v band rb downpipe: SOLD 4" intercooler from Intense power with custom 3" intercooler piping: $400 Precision 6262 T4 divided housing, v band turbo: SOLD Turbo Smart Hyper Gate 45mm wastegate: SOLD Turbo Smart Race Port Blow Off valve: $300 Isis short shifter: SOLD Top Feed Fuel Rail: SOLD RB pulley kit: SOLD Koyo ka24 Radiator: SOLD Electric Fans: SOLD Varrstoen ES2 wheels: $1500 18x9.5 et 0 and 18x10.5 et 0 Federal RSR 255/35/18 fronts Federal RSR 265/35/18 rears Wheels and tires have been driven about 5 miles total. basically new Sparco Evo Racing Seats, two of them: $1000 comes with bride rails, G Force Racing 5 Point harnesses I have a royal ton of AN fittings as well. -10, -8, -6, push lock and hose end fittings. I dont have a need for any of them. Aeromotive Fuel Pressure Regular with marshal gauge: SOLD Suspicious Garage stainless braided Power Steering lines: $160 Suspicious Garage steel braided brake line kit: $180 Suspicious Garage steel braided clutch line: $50 Brake Master Cylinder with brake lines on opposite side: SOLD 12 Row Oil Cooler: $60 -10 fittings on it 12 Row Power Steering cooler: $60 -10 fittings on it Aluminum power steering reservoir with male AN fittings on it: $60 -6 feed and -10 drain 2qt Accusump with brackets, ball valve for on/off, and 1 way check valve: $250 Rotora Big Brake Kit: $1500 Z32 Rear Brakes, rotors + calipers: SOLD Future Fab “Dangle” front knuckles for wide angle: SOLD 5 lug setup: $300 + your stock S14 titanium 3” exhaust: $250 16 Gallon Fuel Cell: $250 XS 80 gph fuel pump with aeromotive pre and after filters: $200 Ksport hydraulic handbrake setup, fittings, lines: SOLD Nissan S14 240sx Shell: $5000 Caged, tubed, tubbed, solid subframe bushings, rear firewall, etc Carbon Fiber Wing: $800 Feel free to call or text me: (949) 922-7937 Text is preferred!!! Last edited by BrownDogg; 06-17-2013 at 07:16 PM.. Reason: added parts

05-27-2013, 08:31 AM	#6
Aquinones Join Date: May 2013 Location: New jersey Age: 42 Posts: 15 Trader Rating: (0) Feedback Score: 0 reviews	ID injectors im interested in the ID injectors. where are you located?

06-03-2013, 08:01 PM	#9
kruked Nissanaholic! Join Date: Feb 2012 Location: Clearwater, Fl. Posts: 2,293 Trader Rating: (37) Feedback Score: 37 reviews	Inner tie rods? __________________ S13 coupe, KA-t

05-20-2013, 06:42 PM	#2
BrownDogg Leaky Injector Join Date: May 2008 Location: Tempe, AZ Age: 35 Posts: 132 Trader Rating: (1) Feedback Score: 1 reviews	Turbo, Manifold, wastegate, and downpipe are SOLD!

05-21-2013, 12:07 AM	#3
BrownDogg Leaky Injector Join Date: May 2008 Location: Tempe, AZ Age: 35 Posts: 132 Trader Rating: (1) Feedback Score: 1 reviews	BUMP! Added pictures and lots of parts

05-21-2013, 12:26 AM	#4
dunkell Join Date: Feb 2013 Location: Mexico, Queretaro City Age: 38 Posts: 11 Trader Rating: (0) Feedback Score: 0 reviews	Specs/size/pics of the ic. Ic core brand? Sent from my GT-I9305

05-28-2013, 03:26 PM	#7
silviaNC Zilvia Addict Join Date: Feb 2012 Location: North Carolina Age: 41 Posts: 937 Trader Rating: (17) Feedback Score: 17 reviews	Pmed you. Interested in a few partds txt 9196283544

06-03-2013, 06:46 PM	#8
BrownDogg Leaky Injector Join Date: May 2008 Location: Tempe, AZ Age: 35 Posts: 132 Trader Rating: (1) Feedback Score: 1 reviews	Updated with a bunch of sold parts!

06-03-2013, 11:43 PM	#10
silvertable58 Join Date: Apr 2007 Location: edmonton Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	pm.ed about brake master and lines

06-17-2013, 07:37 PM	#12
TriniGT Zilvia Addict Join Date: Jun 2005 Location: Trinidad Posts: 981 Trader Rating: (11) Feedback Score: 11 reviews	Still have AN fittings, PM what you have and what price for them all?

07-26-2013, 12:49 PM	#13
Nimso Zilvia Member Join Date: Apr 2008 Location: Tempe, AZ Age: 40 Posts: 281 Trader Rating: (0) Feedback Score: 0 reviews	What kind of exhaust is it?