PA z32 and s13 vh45 swap kits - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Future_gohan · 09-23-2012, 02:41 PM

So I'm doing a vh45 swap for a customer in an s13 and want to sell a swap kits to the public.

The kit for the s13 will include:

Motor mounts.
Transmission mount.
High pressure PS line(Stainless).
Drive shaft(One piece steel)
Headers(Shorty's 2.5" Collectors). *Can change depending on build

For the z32:

Mounts.
Modified crossmember.
modified transmision mount.
Power steering line(stainless).

Best thing about my z32 kit is it uses a non modified oil pan so you will have 0 oil issues and the pan is level with the crossmember.

Will post better pictures in a little bit. Trying to see what interest is out there for this. Thank you!

My apologies, i forgot prices.

Here are the prices seperate:

Engine Mounts - 150.00 + Shipping

Driveshaft - 275.00 + Shipping

High Pressure Power steering line - 110.00 Shipped

= 535.00 If bought all at one time 550 Shipped!

Headers will range from 300.oo - 600.oo depending on what setup you would like to have. (Which is between, short and long tube, 2.5" or 3" Collectors)

The Z32 Will only be 450.oo SHIPPED. Because You will need to send me your crossmember and trans mount to modify.

polarpop · 09-23-2012, 04:25 PM

sir what would this kit run for the s13 coupe thank you

Future_gohan · 09-23-2012, 05:21 PM

My apologies, i forgot prices.

Here are the prices seperate:

Engine Mounts - 150.00 + Shipping

Driveshaft - 275.00 + Shipping

High Pressure Power steering line - 110.00 Shipped

= 535.00 If bought all at one time 550 Shipped!

Headers will range from 300.oo - 600.oo depending on what setup you would like to have. (Which is between, short and long tube, 2.5" or 3" Collectors)

The Z32 Will only be 450.oo SHIPPED. Because You will need to send me your crossmember and trans mount to modify.

iknowaghost · 09-24-2012, 07:40 AM

i am assuming your swap would require a z32 trans, are you going to be doing the harness work yourself? i have an s13 that i am planning this swap for and would greatly appreciate whatever pictures you could post thanks

Future_gohan · 09-24-2012, 07:53 AM

Quote:

Originally Posted by iknowaghost

i am assuming your swap would require a z32 trans, are you going to be doing the harness work yourself? i have an s13 that i am planning this swap for and would greatly appreciate whatever pictures you could post thanks

You would just have to send me the harness for me to modify, but yes I can do a turn key wiring harness.

And It will use a z32 transmission. Currently I don't supply the transmission adapter, but these mounts will use the Xcessive transmission mount.

OLDSCHOOLRICER · 09-24-2012, 08:18 AM

anything for the s14? I'm ready to do a 1uzfe swap with ka trans but this is also a option I've had in mind. any pics of the headers?

Future_gohan · 09-24-2012, 08:41 AM

If i had an s14 or someone local who was doing a vh swap i could easily make the swap kit, but until then I do not have an option to do it in an s14 sorry.

getsideways · 09-24-2012, 09:15 AM

Buyers beware ... I have seen this guys work and it's self taught and less than satisfactory.

He has also bought things from me and never paid me in full! You have been warned

Future_gohan · 09-24-2012, 09:31 AM

We squared that away well over a year ago bud, you got paid.

OLDSCHOOLRICER · 09-24-2012, 09:44 AM

1uzfe it is then. lol thanks bro

Future_gohan · 09-24-2012, 09:50 AM

Quote:

Originally Posted by OLDSCHOOLRICER

1uzfe it is then. lol thanks bro

No problem, the 1uz is an awesome motor but only issue with your setup is I don't know how much it would like the ka transmission, as they're so weak. I would think the z32 or z33 transmission or even the r154 would be a much better setup?

OLDSCHOOLRICER · 09-24-2012, 10:08 AM

nah. there's more then enough people rocking the Kane/Sr trans drifting and what not. and I can still use my stock driveshaft.

nismoninjagtr · 09-27-2012, 11:18 AM

Would the headers go to the s13 cat and bolt right up?

Future_gohan · 09-27-2012, 12:04 PM

Quote:

Originally Posted by nismoninjagtr

Would the headers go to the s13 cat and bolt right up?

They would not, I would have to make a Y pipe and even then where you have to Y it off at would be far after the cat past the tail shaft of the transmission.

jhaas · 10-23-2012, 11:05 AM

I'm interested!! Sent ya a pm

3411 · 05-06-2013, 12:12 PM

great guy i was gunna get the swap from him a while back but i hit a camaro and hand to spend the $ fixing that

comunication was great when i get some extra $ im deff getting a set up

zenki 95 · 05-13-2013, 05:05 PM

Pm'd no reply

c-los13 · 11-22-2013, 12:21 PM

got any pics of the headers!
id love to get a pair if the price is reasonable

09-23-2012, 02:41 PM	#1
Future_gohan Zilvia Addict Join Date: Mar 2009 Location: Pittsburgh, PA Age: 34 Posts: 919 Trader Rating: (5) Feedback Score: 5 reviews	z32 and s13 vh45 swap kits So I'm doing a vh45 swap for a customer in an s13 and want to sell a swap kits to the public. The kit for the s13 will include: Motor mounts. Transmission mount. High pressure PS line(Stainless). Drive shaft(One piece steel) Headers(Shorty's 2.5" Collectors). Can change depending on build For the z32: Mounts. Modified crossmember. modified transmision mount. Power steering line(stainless). Best thing about my z32 kit is it uses a non modified oil pan so you will have 0 oil issues and the pan is level with the crossmember. Will post better pictures in a little bit. Trying to see what interest is out there for this. Thank you! My apologies, i forgot prices. Here are the prices seperate: Engine Mounts - 150.00 + Shipping* Driveshaft - 275.00 + Shipping High Pressure Power steering line - 110.00 Shipped = 535.00 If bought all at one time 550 Shipped! Headers will range from 300.oo - 600.oo depending on what setup you would like to have. (Which is between, short and long tube, 2.5" or 3" Collectors) The Z32 Will only be 450.oo SHIPPED. Because You will need to send me your crossmember and trans mount to modify. __________________ Last edited by Future_gohan; 09-23-2012 at 05:22 PM..

09-23-2012, 04:25 PM	#2
polarpop Join Date: Jun 2011 Location: indiana Age: 40 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	S13 kit sir what would this kit run for the s13 coupe thank you

09-23-2012, 05:21 PM	#3
Future_gohan Zilvia Addict Join Date: Mar 2009 Location: Pittsburgh, PA Age: 34 Posts: 919 Trader Rating: (5) Feedback Score: 5 reviews	My apologies, i forgot prices. Here are the prices seperate: Engine Mounts - 150.00 + Shipping Driveshaft - 275.00 + Shipping High Pressure Power steering line - 110.00 Shipped = 535.00 If bought all at one time 550 Shipped! Headers will range from 300.oo - 600.oo depending on what setup you would like to have. (Which is between, short and long tube, 2.5" or 3" Collectors) The Z32 Will only be 450.oo SHIPPED. Because You will need to send me your crossmember and trans mount to modify. __________________

09-24-2012, 08:41 AM	#7
Future_gohan Zilvia Addict Join Date: Mar 2009 Location: Pittsburgh, PA Age: 34 Posts: 919 Trader Rating: (5) Feedback Score: 5 reviews	If i had an s14 or someone local who was doing a vh swap i could easily make the swap kit, but until then I do not have an option to do it in an s14 sorry. __________________

09-24-2012, 09:31 AM	#9
Future_gohan Zilvia Addict Join Date: Mar 2009 Location: Pittsburgh, PA Age: 34 Posts: 919 Trader Rating: (5) Feedback Score: 5 reviews	We squared that away well over a year ago bud, you got paid. __________________

09-24-2012, 07:40 AM	#4
iknowaghost Join Date: Apr 2012 Location: New Jersey Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	i am assuming your swap would require a z32 trans, are you going to be doing the harness work yourself? i have an s13 that i am planning this swap for and would greatly appreciate whatever pictures you could post thanks

09-24-2012, 08:18 AM	#6
OLDSCHOOLRICER Zilvia Junkie Join Date: Sep 2008 Location: fontana,ca Posts: 420 Trader Rating: (8) Feedback Score: 8 reviews	anything for the s14? I'm ready to do a 1uzfe swap with ka trans but this is also a option I've had in mind. any pics of the headers?

09-24-2012, 09:15 AM	#8
getsideways Zilvia Member Join Date: May 2007 Location: Pennsylvania Posts: 221 Trader Rating: (6) Feedback Score: 6 reviews	Buyers beware ... I have seen this guys work and it's self taught and less than satisfactory. He has also bought things from me and never paid me in full! You have been warned

09-24-2012, 09:44 AM	#10
OLDSCHOOLRICER Zilvia Junkie Join Date: Sep 2008 Location: fontana,ca Posts: 420 Trader Rating: (8) Feedback Score: 8 reviews	1uzfe it is then. lol thanks bro

09-24-2012, 10:08 AM	#12
OLDSCHOOLRICER Zilvia Junkie Join Date: Sep 2008 Location: fontana,ca Posts: 420 Trader Rating: (8) Feedback Score: 8 reviews	nah. there's more then enough people rocking the Kane/Sr trans drifting and what not. and I can still use my stock driveshaft.

09-27-2012, 11:18 AM	#13
nismoninjagtr Zilvia Junkie Join Date: Apr 2010 Location: The "O" state Posts: 484 Trader Rating: (7) Feedback Score: 7 reviews	Would the headers go to the s13 cat and bolt right up? __________________ 4MationD! 90se RB26:build,95pgt KLZE swap:daily,92le vh45 swap planned

10-23-2012, 11:05 AM	#15
jhaas Join Date: Oct 2012 Location: Ohio 740 Posts: 37 Trader Rating: (1) Feedback Score: 1 reviews	I'm interested!! Sent ya a pm

05-06-2013, 12:12 PM	#16
3411 Zilvia Member Join Date: Sep 2005 Location: NC Posts: 232 Trader Rating: (0) Feedback Score: 0 reviews	great guy i was gunna get the swap from him a while back but i hit a camaro and hand to spend the $ fixing that comunication was great when i get some extra $ im deff getting a set up

05-13-2013, 05:05 PM	#17
zenki 95 Zilvia Junkie Join Date: Jun 2011 Location: San Antonio TX Posts: 442 Trader Rating: (1) Feedback Score: 1 reviews	Pm'd no reply __________________ zenki time! "Cant buy weed and pussy with disney dollars"

11-22-2013, 12:21 PM	#18
c-los13 Zilvia Junkie Join Date: Feb 2010 Location: Edinburg, Texas Age: 36 Posts: 446 Trader Rating: (0) Feedback Score: 0 reviews	got any pics of the headers! id love to get a pair if the price is reasonable