Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > Local / Regional / National > USA > South Western States

South Western States Arizona, California, Hawaii, and Nevada.


Reply
 
Thread Tools Display Modes
Old 12-10-2013, 04:52 PM   #1
mechanicalmoron
Zilvia FREAK!
 
Join Date: Jul 2013
Location: tx
Posts: 1,078
Trader Rating: (0)
mechanicalmoron is just really nicemechanicalmoron is just really nicemechanicalmoron is just really nicemechanicalmoron is just really nicemechanicalmoron is just really nicemechanicalmoron is just really nicemechanicalmoron is just really nicemechanicalmoron is just really nice
Feedback Score: 0 reviews
Quote:
Originally Posted by worangejuice View Post
prob try this next, just need to sell the damn thing, its been months of registtering, and smog is the last headache, i have buyer ready.......
1.replaced plugs
2.cleaned out egr intake,behind allen bolt above throttle body
3.used that 'guarantee to pass' stuff (1/2 tank now)
4.seafoamed it

took to a korean shop and guy spoke no english
i fixed alot of stuff and took to a english speaking shop.
said visual inspection fail. one hose was off and EGR doesnt have all hoses hooked up. so I have to hook hoses up. guy i got car from said EGR hooked up fucked car up, so imgonna hook it up properly and go back, Car runs amazinly strong!!! but CA emmisions are the devil..........dreading buying a cat, prob go the illegal route at that point......fucking CA

Oh and im in koreatown
.....what do you mean, the illegal route... the only route to pass is legal, as far as the cat goes.

OF COURSE not having the egr hooked up, which the guy TOLD YOU ABOUT, would make you fail.... hurrdurr.

Drive it hard for a while, and run it at a high idle as you wait your turn. Like, 2k+.
mechanicalmoron is offline   Reply With Quote
Sponsored Links
Old 12-10-2013, 06:08 PM   #2
zerodameaon
Post Whore!
 
zerodameaon's Avatar
 
Join Date: May 2009
Location: Bay Area CA, Sutherlin OR
Age: 37
Posts: 3,289
Trader Rating: (3)
zerodameaon is an unknown quantity at this point
Feedback Score: 3 reviews
Quote:
Originally Posted by mechanicalmoron View Post
Drive it hard for a while, and run it at a high idle as you wait your turn. Like, 2k+.
What so he can waste gas? Sitting in line revving your engine does not help and only calls attention to yourself.

Also unless your best friend will hook you up buying a cat is cheaper and well, not illegal.
__________________
Quote:
Originally Posted by MrMigs View Post
That's a one-way trip to understeer land...
Quote:
Originally Posted by BKdaMoRoN View Post
Maybe you should petition the retards who are paying 5k for an S13.

Need to adjust your idle?
http://zilvia.net/f/s-chassis/395413...-pictures.html
zerodameaon is offline   Reply With Quote
Old 12-10-2013, 07:01 PM   #3
mechanicalmoron
Zilvia FREAK!
 
Join Date: Jul 2013
Location: tx
Posts: 1,078
Trader Rating: (0)
mechanicalmoron is just really nicemechanicalmoron is just really nicemechanicalmoron is just really nicemechanicalmoron is just really nicemechanicalmoron is just really nicemechanicalmoron is just really nicemechanicalmoron is just really nicemechanicalmoron is just really nice
Feedback Score: 0 reviews
Quote:
Originally Posted by zerodameaon View Post
What so he can waste gas? Sitting in line revving your engine does not help and only calls attention to yourself.

Also unless your best friend will hook you up buying a cat is cheaper and well, not illegal.
No, just let it chill at a fast idle, if it's possible and not obvious.. Don't be all fast and the furious.

Nothing to do with wasting gas. If you don't understand why a hot motor is considerably more likely to have good numbers, there's no helping you.... but I'll try.

When your motor is cold (idle is quite cold, even if it's "warmed up") the combustion is not as complete - this is why we have all these systems that kick in at idle to help with emissions. Oil burns and makes gummy stuff that will burn when you do have to get rpms up for the tests - this is why a car that burns oil will sit and idle and not smoke, but when you touch the throttle it makes clouds - hopefully his car's not that bad obviously, but even a perfect engine MUST burn oil, by design, because it's what lubricates the rings. But the gas as well, and everything sitting around moving slowly in the egr passages and such - if the cat's not so good, you don't want it getting cold, that's why we have a pair valve - to keep it "cooking". You want to go in there with a blisteringly hot engine that's had all the crud burnt out of it right up until the last moment, and a cat that's super hot so it's actually converting like it should be.

Basically your motor slowly fills with coal when it runs cold. Coal is dirty. Dirty fails tests. When it's hot it can keep up with it's own waste production, as well as simply producing less of it. This is also what seafoam helps dissolve, so it can be burnt the rest of the way and blasted out.


Now, I'm half expecting something about how that's what valve seals and piston rings take care of, and they should be replaced.... But if you're not volunteering to pay for his oem rebuild, that's irrelevant. This is an old motor that's probably out of tolerances in many ways. We wouldn't be discussing this at all if it was a perfect situation with a car that had no trouble with this test.
mechanicalmoron is offline   Reply With Quote
Reply

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:54 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net