Code 11 crank position sensor? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

sxse240 · 09-12-2004, 09:40 PM

After a very hard stop from high speed, my car threw codes 11 and 21, crank and cam sensor. I had severed the crank sensor wire in the harness where it turns from the back of the motor onto the firewall. It took a while to figure out where the open circuit was. The symptoms were that the car would lose ignition on moderate to hard stops.

Sounds different from yours, but there's my story. Damn Z32 brakes!

09-12-2004, 09:40 PM	#2
sxse240 Leaky Injector Join Date: Apr 2003 Location: NM Posts: 95 Trader Rating: (1) Feedback Score: 1 reviews	After a very hard stop from high speed, my car threw codes 11 and 21, crank and cam sensor. I had severed the crank sensor wire in the harness where it turns from the back of the motor onto the firewall. It took a while to figure out where the open circuit was. The symptoms were that the car would lose ignition on moderate to hard stops. Sounds different from yours, but there's my story. Damn Z32 brakes!