another s13 HUD/cluster lights problem!!!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Linux2501 · 01-24-2014, 10:37 AM

Alright so I grounded out the red wire to the flex board and I have illumination again. However my speedo still doesnt work. I went and checked for bad solder joints on the digital speedos board and hit everything just in case. but I found there where two burnt marks inside the glass.

Anyway I ordered the cap to repair the board think the cap will fix the problem? also picking up 3 clusters for 60 bucks this weekend I know the sohc tach and the Dohc tach are different or wired different.

But is there a difference between the two speedos? and on top of that Is there a way to test the speedo and the lower harness to the dash harness?

01-24-2014, 10:37 AM	#7
Linux2501 Zilvia Junkie Join Date: May 2012 Location: Muscle Shoals AL Age: 34 Posts: 307 Trader Rating: (1) Feedback Score: 1 reviews	Alright so I grounded out the red wire to the flex board and I have illumination again. However my speedo still doesnt work. I went and checked for bad solder joints on the digital speedos board and hit everything just in case. but I found there where two burnt marks inside the glass. Anyway I ordered the cap to repair the board think the cap will fix the problem? also picking up 3 clusters for 60 bucks this weekend I know the sohc tach and the Dohc tach are different or wired different. But is there a difference between the two speedos? and on top of that Is there a way to test the speedo and the lower harness to the dash harness?